I have a Cisco 3725 that I started to syslog messages from today with various Memory allocation errors.
Logged into the box & can do some basic commands. But... if I try to "show run" or wr t I ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21438325.html
Zones:
RoutersDate Answered: 05/27/2005 Grade: A Views: 0
I've got a 3725 with 2 x 16-Port Intrachassis Etherswitch Modules installed (NM-16-ESW=).
I've spent a few days trying to get the Vlan's configured correctly, and simply can't.
When the two mod...
http://www.experts-exchange.com/Networking/Misc/Q_21315192.html
I have a Cisco 3725 router with 6 t1 cards coming in from remote branches. I want to monitor the level of traffic coming through on each interface in order to see how much bandwidth is being used ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21684432.html
Zones:
RoutersDate Answered: 01/31/2006 Grade: A Views: 0
I am physically at the datacenter trying to configure this new
3725.
We have an ip range off a Class A with a /24 giving us 254 usable
addresses. The router has two FastE ports and I am using ...
http://www.experts-exchange.com/Networking/Misc/Q_21312600.html
We have a pix on the network presently and are going to remove it for a 3725 with security and firewall.. My boss told me there is a way to import all the rules and setting from the pix to the rout...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21905357.html
Hi All,
I have a Cisco 3725 router which displays some messages when i turn it on. I have no idea what this messages really mean.
Can someone please help me interprete these messages and te...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22594401.html
Zones:
RoutersDate Answered: 05/25/2008 Grade: B Views: 76
I was given two Cisco 3725 routers and I am unable to access either through the console port. I don't have either of their configs so I don't know what is enabled and what isn't. I know my laptop w...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23396492.html
Zones:
RoutersDate Answered: 05/13/2008 Grade: A Views: 27
We just switched over to a frac T3 (12 Meg) and i have noticed some errors on the interfaces...on the inside FA 0/0 int i see unknown protocol drops piling up and on the serial interface i see inpu...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23524251.html
I forget the terminology but where do I find the current connection cost for my router, and whether my router can support an additional WAN Interface Card.
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23656388.html
Zones:
RoutersDate Answered: 10/21/2008 Grade: A Views: 8
When you run eigrp over GRE with IPSec tunnels, do you have to manually configure the neighbor address using eigrp neighbor ip address command? Thx
http://www.experts-exchange.com/Software/System_Utilities/Remote_Access/VPN/Q_23847560.htm...
