From my understanding, the queuing mechanism is composed of hardware and software. You can check the hardware queue for a serial port with sh controllers serial command. How about with the other in...
http://www.experts-exchange.com/Networking/Network_Management/Network_Design_and_Methodolo...
From my understanding, the queuing mechanism of each interface is composed of hardware and software. The QoS software will be used if the hardware queue is full. So, I am trying:
1. To check my ha...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23662937.html
I have a Cisco 3845 router acting as our main gateway for a small hosting setup. It has two interfaces facing the public network and one facing the private network, hosting a few boxes. It seems ...
http://www.experts-exchange.com/Networking/Misc/Q_22067834.html
I have a Cisco 3845 that is connected to a Cisco 4507R. I have dual DHCP pools setup. One for VOice one for Data. Data is on the Native VLAN 1 and Voice goes to Vlan2. I am not able to get any devi...
http://www.experts-exchange.com/Networking/Misc/Q_22455172.html
I saw this setup in the lab and I try to explain to myself how the distribution-list works. Please see the partial config below.
The distribution router permit 10.0.0.0 and 192.168.10.0 on the o...
http://www.experts-exchange.com/Networking/Network_Management/Network_Design_and_Methodolo...
I am just wondering if there is any commands to check if my 3800 series router and my Catalyst 6500 switch drop any packets in the queue configured below. I suspect that there are packets being dro...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23579712.html
Zones:
RoutersDate Answered: 11/18/2008 Grade: A Views: 0
I have a Cisco 3845 router, and am using MRTG to graph CPU and Interfaces.
Is there a way to graph temperature? I'd like to actually graph the real temp. But I think within IOS there's also a ...
http://www.experts-exchange.com/Networking/Misc/Q_21394586.html
Zones:
NetworkingDate Answered: 04/20/2005 Grade: A Views: 4
hp 3845 usb printer it prints well for some hours ,after that if print it gives printing on printer icon and it doesnt print. after restart it print full or half.Again if i reinstall it print some ...
http://www.experts-exchange.com/Hardware/Peripherals/Printers_Scanners/HP/Q_21548753.html
Zones:
HP PrintersDate Answered: 09/03/2005 Grade: C Views: 0
After copying the new file from my tftp server, I now have two files sytem and the router still uses the old file. How do I force the router to use the new file system? I was going to use the erase...
http://www.experts-exchange.com/Networking/Misc/Q_21559560.html
Zones:
NetworkingDate Answered: 09/13/2005 Grade: A Views: 18
Hello,
We have a 3845 router, with 4 FastEthernet ports. Currently, only two are used. We have some static routes that point out FastEthernet0 towards our LAN, and a default route out FastEthe...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21721268.html
Zones:
RoutersDate Answered: 03/03/2006 Grade: A Views: 0
