After inserting two ws-x4448 line cards in catalyst 4006 - The status lights on both line cards flash orange.
sh module, sh version indicates the slots are 'empty'
if I unplug a line card - t...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21093275.html
Zones:
RoutersDate Answered: 08/17/2004 Rating: 7.6 Views: 0
I have a device connected to a Catalyst 4006. When i set the port to vlan 60 the connection is fine and never is intermittent. Although, when i change the port to vlan 100, the device loses connect...
http://www.experts-exchange.com/Networking/Misc/Q_21483888.html
I'm looking at a Catalyst 4006 configuration and there is a command in there which states
set interface me1
what interface is this? There is another one called s10 -is this the same as the ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20249403.html
Zones:
RoutersDate Answered: 12/27/2001 Rating: 8.2 Views: 0
Does anyone know the latest image for Cisco Catalyst 4006? Where to download images?
The supervisor board is named WS-X4013. Thanks in advance!
/Daniel
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20729847.html
Zones:
RoutersDate Answered: 09/09/2003 Rating: 9.8 Views: 0
Hello people,
We are running a fully switched ethernet network with a cisco 4006 catalyst with SUP III module as our core switch and catalyst 2950 switches as edge switches. Our servers are hook...
http://www.experts-exchange.com/Networking/Misc/Q_20860598.html
Zones:
Networking,
...Date Answered: 01/28/2004 Rating: 5.8 Views: 0
I have inherited a cisco 4006 switch in my new job, it currently have the following modules
Mod Slot Ports Module-Type Model Sub Status
--- ---- ----- --------------...
http://www.experts-exchange.com/Networking/Misc/Q_21260915.html
Zones:
NetworkingDate Answered: 03/18/2005 Rating: 8.2 Views: 0
Hi,
My Window 2003 server's event logs is full of SMTPSVC 4006 warnings.
Inetinfo is going mad and the server is becoming slower. How can i stop these kind of request ?
Merci.
http://www.experts-exchange.com/Software/Server_Software/Web_Servers/Microsoft_IIS/Q_22604...
Hello,
I have an HP server setup with a NIC Team. I have one NIC plugged into one 4006 core switch and the other NIC plugged into the second 4006. On the cores I'm running PVSTP. If I'm not ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23621959.html
Hello,
My company just begun an install of a Nortel IP phone system. We are running the system on it's own VLAN, VLAN 5. The core of our network is a Cisco Catalyst 4006. We run Dell Powercon...
http://www.experts-exchange.com/Networking/Network_Management/Network_Operations/Q_2367515...
Hi,
I have two routers each with a 128k link to the same outside network. The routers are connected directly to a cisco 4006 Switch. Also Attached to the switch, a 3640 Cisco Router connects an ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20645762.html
Zones:
RoutersDate Answered: 05/23/2004 Rating: 6.2 Views: 0
