Advertisement

1 - 10 of 46 containing alltags:("4300") (0 seconds)
having touble with the sound driver on a Sat Pro 4300 - the default installed one is poor, and the one from the toshiba web site is no better.  OSund plays ok for 2 secs, then slightly slows, gives...
Zones: Windows 2000Date Answered: 12/13/2001 Grade: A Views: 0
Hello, Thanks for reading our question.  We have a scanner on one of our machines.  It always brings the image in about 1 to 3 degrees crooked.  Is there any way for us to reset the input via so...
Zones: General ScannersDate Answered: 02/13/2004 Grade: A Views: 0
This is what I have: Poweredge 4300 3 - SCSI 8gb drives Perc Raid controller I am trying to install Server 2003..... I configured all 3 drive and made one logical drive.....( it totaled ...
Zones: Drives / StorageDate Answered: 05/02/2006 Grade: A Views: 0
I have been getting a popup USB DEVICE NOT RECOGNIZED SHOWS UP IN DEVICE MANGER AS UNKNOWN DEVICE I DO NOT HAVE ANY DEVICES ATTACHED I HAVE A DELL 4300 O/S WIN XP HOME
Zones: Drives / StorageDate Answered: 09/20/2006 Grade: B Views: 0
We experience problems with unattended setup on Toschiba PCs (our case : Satelitte Pro 4300, Satelitte Pro 4600 and Portege 3490CT The unattended setup reboots while the network part is at +/- 10%
Zones: Windows 2000Date Answered: 04/04/2003 Grade: B Views: 0
Hello, I tried to reinstall Win Me over itself, but it would not do it. I need a [Step by Step Procedure] if possible so that I can format the HD and then do a clean reinstall of Win Me. I do not h...
Zones: Windows MEDate Answered: 05/25/2004 Grade: A Views: 0
My Laserjet 4300 just started printing pages with two black lines down the center.  They are irregular lines that look like there is some ink in the machine.  The 4300 is only one year old. I ha...
Zones: HP PrintersDate Answered: 11/23/2004 Grade: A Views: 0
I used to play dvd's fine with my toshiba win 98 I reinstalled win 98 and dvd's play slow and interrupted winth powerDVD and Blaze DVD I downloaded the video drivers for the notebook but somethi...
Zones: HardwareDate Answered: 12/23/2004 Grade: B Views: 0
Hi, We had a Dell PowerEdge 4300 server with 6 drive bays. Its a RAID-5 configuration and the 6th drive was configured as the fail-over drive. One fine day, one of the drives (drive in slot 3) w...
Zones: HardwareDate Answered: 01/21/2005 Grade: B Views: 0
Hello all, I have a Dell Dimension 4300. The spec's are a P4 1.6ghz, 128mb ram. The system had a bad hard drive. I replaced the drive and started to reload Windows XP Professional. During the in...
Zones: Hardware, PCsDate Answered: 10/30/2005 Grade: B Views: 53