I have (2) 4510R chassis with (2) 4516 supervisors in each along with (4) 4548 switch mods. Everything seems to work until I remove the Sup in slot 1 and boot off the Sup in slot 2. When I do this...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23372199.html
I have 9 switches in my building. Users on one particular switch in the building have a hard time opening up drive letters that are mapped to DFS shares on my network. The other 8 switches' users...
http://www.experts-exchange.com/Hardware/Servers/Q_23390577.html
Hi,
I've this configuration on Cisco Catalyst 4500:
interface GigabitEthernet3/31
description ServerWeb
switchport access vlan 330
!
interface GigabitEthernet3/41
switchport trun...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23482576.html
I need to remove a NAT statement from a 3com router and wondered if anyone knew the command or switch to do that?
The statement is:
nat server protocol tcp global 10.1.7.3 any inside 10.3.7.3 a...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23570599.html
Zones:
RoutersDate Answered: 07/17/2008 Grade: A Views: 0
Hi guys and gals. I'm having a strange problem with my notebook. It all started one day when I was in Windows and the screen just froze. Powered it off and then back on. The lights would come o...
http://www.experts-exchange.com/Hardware/Laptops_Notebooks/PC_Laptops/Q_23696896.html
Good Afternoon Everyone,
Here is my situation:
I have a site in Tampa Bay that is connected to a central site in Lexington, KY. The connection between the 2 is a point to point T-3 line. Th...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23915193.html
Trying to console into a 3com 4500 Series Switch. I have a console cable with rj45 and db9 connectors plugged in. Using Hyperterminal to connect to comport, w 9600/8/none/1/hardware. and I get n...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23330710.html
We are currently in negotiation to move to a co-location site. I have to purchase new equipment for this site because not everything is going ony mission critical stuff. My question is I have prett...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23493497.html
