U-clip is missing from board that apparently completes circuit with silver z-clip atop the chipset.
I need a way to complete the connection without the clip as I cannot locate it. I need ...
http://www.experts-exchange.com/Hardware/Misc/Q_22857086.html
Dell desktop has 256 MB of DDR RAM. It uses Windows XP. Computer had many viruses and has been cleaned. Once Window starts booting, computers works very well. It takes a very long time to even g...
http://www.experts-exchange.com/Hardware/Components/Motherboards/Q_23590674.html
4 year old Dell 4600c (compact chassis) came with a 160W supply. I'd like to replace it with a >250W supply to run a new graphics card. Can't find anything on the dell support site about putting ...
http://www.experts-exchange.com/Hardware/Components/Power_Supplies/Q_23597831.html
i am working on a Dell Dimension 4600c.
This machine will not power up, it has a blinking amber light on the MB, and the power buttton on the front steadily blinks amber.
I assumed it was the...
http://www.experts-exchange.com/Hardware/Desktops/PCs/Q_23791469.html
Hello,
I have a friend's dell dimension 4600c and it is running running incredibly slow.When I first got it, the power supply was dead so I have since replaced the power supply. It was given to ...
http://www.experts-exchange.com/Hardware/Desktops/PCs/Q_23869611.html
I have a dell inspiron 4600c and my northbridge chiptset heatsink FELL OFF. One of the mounting Hooks is now missing and i can't get the heatsink back on without it. I would just use thermal paste ...
http://www.experts-exchange.com/Hardware/Misc/Q_21098721.html
Zones:
HardwareDate Answered: 11/24/2004 Grade: A Views: 4
I did a clean install of the base XP Pro (pre-SP1/SP2) on a Dell 4600c.
Prior to the install updated the BIOS to the latest version.
Installation was fine. Boot was normal. Installed all n...
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/XP/Q_21458692.html
Zones:
Windows XPDate Answered: 07/10/2005 Grade: B Views: 0
I am about to upload a picture showing this situation. One of two clips that holds down the heat sink has come loose from the motherboard. How do I reattach this clip? I have no experience with ...
http://www.experts-exchange.com/Hardware/Q_22098335.html
Hello,
There is a user that inadvertently bent a pin on his CPU, into a curly loop. Upon straightening, with heat and tiny tools, the pin broke off at the base, leaving a dot in small amount of s...
http://www.experts-exchange.com/Hardware/Components/CPU_Processors/Q_22594841.html
The slot for the second memory card on the motherboard adjacent the two main chips and the heat sink fan is not working - I had an overheating problem, got a new main heat sink assembly and fan and...
http://www.experts-exchange.com/Hardware/Components/Motherboards/Q_23488538.html
