Hi,
I'm trying to forward my port 5060 to my asterisk box and have set both TCP and UDP to forward to my asterisk internal IP. But when I try to check if it open I get a Error: I could not see yo...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_21910202...
Zones:
VoIPDate Answered: 08/07/2006 Rating: 7.4 Views: 192
Hello,
My goal is to access tcp port 1723 and GRE (IP 47) on a Windows server inside our LAN from the Internet. I am having trouble connecting through the router and PIX.
Internet > Router...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21816964.html
Zones:
RoutersDate Answered: 05/28/2006 Rating: 8.6 Views: 0
our isp provider block port 5060 (sip port)
any solution or any way to bypass isp block
thank u
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_22154727...
Zones:
VoIPDate Answered: 03/02/2007 Rating: 7.8 Views: 17
I have to offices connected by Internet. How i configure VPN router cisco 1841 IOS 12.4 to access all workstation and file servers of the 2 offices. I already configured VPN, but i need to co...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22719918.html
Zones:
Routers,
VPNDate Answered: 12/15/2008 Rating: 9.6 Views: 0
We just changed ISPs from a cable provider to a full T1. I reconfigured the PIX with WRITE ERASE, running setup to apply IP, then TFTP-ing the updated config with the new IPs added. I was assumin...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21744325.html
I am using SIP trunking for a voip phone system. I need to allow traffic on 5060 in and out of my network. However, I am not real sure what commands I need to add to the router (Cisco 1841). I have...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
In trying to chase down another issue on a network I discovered what seems to be an anomaly or at least something which I don't believe should happen and/or is unnecessary, causing (possibly) certa...
http://www.experts-exchange.com/Networking/Protocols/Transport/ICMP/Q_23814609.html
Hi everyone,
I was hope someone could help with a Backup Architecture question.
I have the following situation. I have a 2 node Windows 2003 Cluster front ending a MSA 1000 with about 6TB of ...
http://www.experts-exchange.com/Storage/Storage_Technology/Q_23911446.html
Trying to configure an access list to allow port 5060 for SIP.
When I get to the eq 5060 command at the end of the line, I get unrecognized command.
I am running 12.4 IOS on a 2851 router.
what ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23822827.html
Zones:
RoutersDate Answered: 11/10/2008 Rating: 9.0 Views: 22
