This what I want to do,
67.x.x.1 to 67.x.x.255
So I have public Ip addresses I would like to add a (Eth 3) so I can control all of the outside
ip addresses going out from the pix vs. having a...
http://www.experts-exchange.com/Security/Misc/Q_23070278.html
I've got a PIX 515E, 6.3(3), and the following interfaces, ACL's regarding this problem and statics:
nameif ethernet0 outside security0
nameif ethernet1 inside security100
nameif ethernet2 dmz...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_20895193.html
I need to add smtp and pptp to an existing pix setup on a 515e. Since the person who set it up put an implicit deny at the end that means I have to delete old access-list and create a new one. My q...
http://www.experts-exchange.com/Networking/Misc/Q_21156934.html
I have a PIX 515 and am trying to create a static NAT (or maybe PAT) for our internal Webserver to have outside users access. I still am unable to connect to it outside the firewall. Here is the ...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21260570.html
I found the PIX 515e was sitting on the rack turned off(I think previous guy worked on it and gave up) and I want to use it.
But I don't have knowledge of how to setup the firewall.
1st, I downlo...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21283814.html
Hi,
I just unpacked a sexy looking 515e, very nice with a super web interface.
Whilst fiddling i think i've screwed it up - possibly turning off its dhcp etc meaning that i can't connect to i...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21359594.html
I've made the split tunnel config with the PDM 3.0 but the Split tunnel feature is not working...can anyody look on the config and say me what is the failure ?????
Building configuration...
: ...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21538125.html
HI,
I use the PIX 515E with VOIP traffic going through it. Everything running fine, except every few weeks, the PIX would act up. It would become very slow. And would not complete the call conne...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21608824.html
Hi,
scenario :
we have one PIX 515E and one 3360 serier Router, our PIX one interface having security 0 is connected to ISP leased line and second interface having security 100 is connected t...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21659341.html
WhatÂ’s the difference between the 515pix and 515e
Also what is the difference between a unit with a restricted and an unrestricted license?
Does the 515e support Microsoft PPTP clients with ...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21673083.html
