Hello ,
I just bought a Dell powerconnect 5224 switch . It came with no software . I need to access the switch but i have no idea how . It sdays i can access via the web but I don't know how to ...
http://www.experts-exchange.com/Networking/Misc/Q_20934640.html
I need to get to the web interface for a dell powerconnect 5224 that we have, however, no one knows the ip address of it so I will have to console into it.
After reading the manual, it says you ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23585030.html
I'm connected via CLI interface to our Dell Powerconnect 5224. When I do a show ip interface, it shows:
IP address and netmask: 0.0.0.0 255.0.0.0 on VLAN 1,
and address mode: DHCP
How do I ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23588666.html
I have a stack of 3 PowerConnect 3024 switches that are linked together and four lines are trunked to a PowerConnect 5012. I want to move the four trunked lines to a PowerConnect 5224 gigabit s...
http://www.experts-exchange.com/Networking/Misc/Q_21024212.html
Hi
I hope someone can help me ...
I have bought a Dell 5224 an connected it over COM 1 with Hyperterminal.
It works very well .. but I don´t have the Username and the Password.
I tryed th...
http://www.experts-exchange.com/Networking/Windows_Networking/Q_21205022.html
hi
howto configurte port trunking between CISCO Router WS-C3550-12T
and managed Switch PowerConnect 5224 from DELL ?
regards
anoym
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21127388.html
Zones:
RoutersDate Answered: 02/13/2006 Grade: A Views: 0
Ok I need some guidance. Our network expert quit and while I'm somewhat versed in the more detailed networking side of things I need some help.
We are installing a VOiP system in the company and...
http://www.experts-exchange.com/Networking/Misc/Q_21718782.html
