I have a Cirrus Logic 5424 VL-Bus video card with 1Mb
of video ram.
My computer system is a 486DX2-66 running on a VL-Bus
mother board. It has 20Mb of system ram and a 1Gb
hard disk. I am currentl...
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/Win95_3x/95/Win95_S...
Zones:
Win95 SetupDate Answered: 01/03/1997 Rating: 6.6 Views: 0
Hello Experts!
Let me give a little background to better explain where I'm coming from: Our organization currently has about a dozen Dell PowerConnect 6248P switches. They have been fine so far ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_24699428.html
Good day! Here are the details:
Dell 5424 switch Ip - 209.43.94.182
SCALE SAN connected to switch with following private IP's 209.43.94.170, .171, .172
SCALE SAN public IP's - 209.43.94.17...
http://www.experts-exchange.com/Networking/Network_Management/Network_Design_and_Methodolo...
We have a Dell 5424 switch.
VLAN 1 - Ports 3 - 10 172.16.0.0/24
VLAN 2 - Ports 11 - 17 172.16.1.0/25
VLAN 3 - Ports 18 - 24 172.16.2.0/25
It's a basic setup and working fine, we have a 2...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_24686661.html
Hi Guys,
I have an issue between a Dell 6224 and a Dell 5424 which are trunked. The switches are connected together via port 1/g1 on the 6224 and port g1 on the 5424.
The configs are listed bel...
http://www.experts-exchange.com/Networking/Network_Management/Network_Design_and_Methodolo...
Hello,
i need help for setting up two PowerConnect switches.
I've defined VLAN 19 and VLAN 2 on both switches.
switch 1&2:
I've configured Port 2-16 to VLAN 19 (all ports at the moment in...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23736170.html
First of all, i'm quite new to the storage world, so I hope I can get some advice on our new needs for our hosting servers.
We are expaning our services and therefore we are thinking of buying t...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23226691.html
Is it possible to LAG or Team switch ports across switches that are not stacked or even stackable? I say no, that it's not possible even using LACP, but I have a client that believes that it is po...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23500579.html
Experts:
I just purchased an EMC AX4-5i dual-SP SAN appliance; two racks, one for SAS drives and the other with SATA drives. I'm just setting up the appliance and I'm stuck, hoping you all can h...
http://www.experts-exchange.com/Storage/Storage_Technology/Q_23354987.html
Using Dell Powedge 5424 swiches to connect two sites using a Metro-e service at 50 mbs.
Configured switches with 2 VLANs, ports 1-10, VLAN 100, Ports 11-20 VLAN 200, port 24 is the trunck port t...
http://www.experts-exchange.com/ITPro/IT_Administration/Q_24723569.html
