the device is a Cisco PIX 501
i need to nat an ip from the inside to the outside but the PDM is not working. i want to NAT the following ip's to the following ports
192.168.0.100 to port 13...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
I want to convert my Cisco PIX firewall conduit statements to ACLs. I think I have the syntax figured out for the ACLs, but I am unsure how many ACLs I should create. My existing conduits are at ...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
Is there a way to create an ACL that would allow me to send a ping from any host on the inside of the PIX to any host on the outside, while at the same time precluding any host on the outside from ...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
I can run the following (in configure terminal mode) to copy my PIX configuration file to a tftp server:
write net 192.168.128.160:pixconfig
This creates a text file with my pix configuration...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
I have created a vpngroup on my pix and now I am trying to configure it to authenticate to our domain controller. I have tried the command "vpngroup DTVPN authentication-server <IP address>", but i...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
Hi all,
A customer of ours is having the strangest setup. They have 2 firewalls connecting to the internet. We control only one of them. The other one is the main default gateway for their netwo...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
Is is necessary to enable NAT-T to allow hosts whose IPs have been NATed through a VPN tunnel to communicate?
Here is the example.
I am working with another company that shares the same ip inte...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
I have a pix firewall with a Microsoft Small Business Server behind it. I want to be able to use RWW (4125) and be able to remote desktop(3389) to the server. iI believe that 4125 is open because I...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
We have an intruder that is accessing our win2k3 terminal server. I have changed the passwords so he/she can no longer get in, but the lawyers want to track any future attempts. Is there a way to...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
I have recently captured a config file from my cisco PIX 525E and i would like to clean it up the way you would clen up a router config file, but I don't know where to start. After using solar wind...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
