I have an email server on my internal network, and the incoming NAT works properly: pubIP x.x.x.48 translates to intIP x.x.x.201 However, when I go to a site like ip-lookup.net from the email serve...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Firewalls/Q_23054476.html
Could someone suggest why the split-tunneling is not working in the following configuration:
.........
names
access-list 101 permit ip any 192.168.253.0 255.255.255.0
access-list outs...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
I can't see to find out why my pix box is not working. I attached the running-config. I'm still stumped as to what isn't happing . May i ask for some assistance.
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
I'm trying to setup the vpn connection on my cisco pix box and wanted to know if instead of creating a server to take care of the aaa and radius and vpn-auth. can i just have all that info on the ...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
How can I add additional lines/entries to an existing access list on our CISCO Pix to enable inbound SMTP traffic from a range of IP Addresses.
An extract of the config is as follows: What is th...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_23734754.html
I'm trying to configure my network to allow a gradual migration between two ISPs, ideally I will end up being able to just change the NAT translation from internal to ISP-A to internal to ISP-B, an...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
I've got a couple servers in a DMZ that need access to a couple servers on the inside and also need to be able to access the outside for DNS lookups and other stuff. I also need inside hosts to be ...
http://www.experts-exchange.com/Networking/Misc/Q_23148020.html
Hi,
I wanted to know the best way to configure, view, and manage Pix Box after its been setup. I know how to find my way around a cisco device but as for logs I don't know why a system administra...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Firewalls/Q_23377760.html
I'm trying to regulate the domain port on our firewall so that only the DNS can communicate using the domain port. If you look at my running config that i attached it makes it a little difficult t...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
I'm cleaning out some of the services off my network and want to block some of the ports on my pix.
When trying to remove "TRANSLATION RULES" (Static) i get an error.
How can i remove those rul...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
