I have a canon 610 that prints and then intermittenly stopped and says to replace yellow cartridge. replace with new and still tells to replace. now both blue and yellow constantly give the same pa...
http://www.experts-exchange.com/Hardware/Peripherals/Printers_Scanners/Q_10157877.html
my printer will only print in colors black and blue, it has red and yellow also but wont use the colors why
http://www.experts-exchange.com/Hardware/Peripherals/Printers_Scanners/Q_10310240.html
Zones:
PrintersDate Answered: 03/15/2000 Grade: A Views: 0
I use a Gateway 610 Media Center PC which has a 20 Pin Atx Motherboard.
The PSU had problems so i bought a PSU with 20 pin + 4 pins slidable.
I wanted to close my PC back to normal but the design...
http://www.experts-exchange.com/Hardware/Components/Motherboards/Q_23659013.html
My eMachines 610 desktop computer won't start. Instead, it beeps for about 1 second, then silence for about 3 or 4 seconds, then beeps for 1 second again. It keeps doing this for at least 30 beeps....
http://www.experts-exchange.com/Hardware/Desktops/PCs/Q_23262753.html
Zones:
PCs,
HardwareDate Answered: 03/23/2008 Grade: A Views: 24
How do I network a Centris 610 with no ethernet connection, with a Power Mac G3 and a HP 4M Laser printer. Can this be even be done?
http://www.experts-exchange.com/Apple/Networking/Q_10043981.html
I am having a strange problem. This device used to work without a hitch but I can't be sure that no-one else has changed any settings. What happens is that when you plug a laptop into the projector...
http://www.experts-exchange.com/Hardware/Misc/Q_20128144.html
Zones:
HardwareDate Answered: 06/03/2001 Grade: A Views: 0
Have a new SDSL line and have been supplied a Speedtouch 610 SHDSL router, and 2 IP Addresses.
The router seems to have come pre configured with NAT and a firewall of some sort - I dont need this,...
http://www.experts-exchange.com/Networking/Misc/Q_21044399.html
I have bought used some 3com super stack 610 switches. Have no idea of how to get into them. Don't know ip address. I have read and it seems you need some special software for the console port?...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21242975.html
Zones:
RoutersDate Answered: 12/15/2004 Grade: A Views: 0
I know that this sounds stupid, but the instructions show a switch on the back next to the power input and there is no switch there, nor anywhere on the box. Can you help?
http://www.experts-exchange.com/Hardware/Peripherals/Scanners/Q_21359341.html
Hi:
We have built an OES Netware 6.5 server and installed Bundle Identity Manager (comes with OES) on it and a Microsoft 2000 server with AD.
Everything seems to work, eDir and AD communicate...
http://www.experts-exchange.com/Networking/Novell_Netware/Q_21853225.html
