These are newer 6513,IOS (tm) s72033_rp Software (s72033_rp-PSV-M), Version 12.2(18)SXD4.
I have added VLAN 80 and confiured vlan interface on one router. While adding vlan to the trunk port. Th...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21775309.html
Zones:
RoutersDate Answered: 03/15/2006 Grade: A Views: 14
I am setting up Surf Control within out network and have been told to mirror a port. I setup the mirror using the command: set span source_port destination_port.
The SPAN looks to be fine.
De...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21796289.html
Zones:
RoutersDate Answered: 04/11/2006 Grade: A Views: 0
all ports on my cisco 6513 switch are transmitting the same amount of data constantly from 9-5 (approx 10mb constantly)
I'm using solarwinds to monitor my server which are connected to the core ...
http://www.experts-exchange.com/Networking/Misc/Q_21825219.html
I am seeing traiffic from our Cat 6500 to a multicast address, is this normal? The following is being reported by our security vendor:
Event ID 81230
Time 12:01AM CDT Mar 19 2007
Type ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22472219.html
I will be installing and configuring a new Cisco 6513 with Sup II Plus/MSFC/PFC blade. It will conect directly to a Cisco PIX 515E (which goes to internet). I plan to set up a routed network betwee...
http://www.experts-exchange.com/Networking/Misc/Q_21021599.html
how can you stop multicast and broadcast traffic on a Cisco 6513 switch?
what commands can I use?
http://www.experts-exchange.com/Networking/Misc/Q_21829706.html
we are setting up websense on our ISA server, we intend on running the Network agent (websense) on a diffrent server which will SPAN the ports
our Firewall and ISA are both connected to our core...
http://www.experts-exchange.com/Networking/Misc/Q_21890924.html
Dear Experts
I have the following set up 2 Cisco 6513 Switches for full redundency,
Cisco 6513 Switches (2 for redundency (IOS Version 12.2(17d)SXB11) and they are connected to cisco 3550 S...
http://www.experts-exchange.com/Networking/Misc/Q_22122185.html
Hi All,
I have a Cisco 6513, here's the last part of a show version to show the hardware config:
Mod Port Model Serial # Versions
--- ---- ------------------- ----------- --...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22147467.html
Zones:
RoutersDate Answered: 02/08/2007 Grade: A Views: 0
Hi Experts
We are having two cisco 6513 switches with SUP 720. One with IOS 12.2.17d-SXB11 and other with 12.2(18)SXD7b. I have configured netflow in both the switches. The switch with IOS 12.2....
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22731031.html
