We have a new intf2 interface to parent company intranet, the route for local lan users to intf2 network works successfully as does vpn users access to local lan resources. But VPN users cannot pin...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
I have two Pix 515e firewalls with a VPN allowing access to their respective inside networks. Both networks are part of the same AD. On one of my Pix's I have a DMZ port with a web server. I wou...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
I have an ASA 5505 firewall that seems to be dropping alot of packets when I try to ping through the device to ASA's Gateway (ISP's Router) If I ping the inside interface of the ASA I have no packe...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Firewalls/Q_23091831.html
I recently installed a ASA5520 (replaced a PIX 515) and Exchange 2007 on our network. For Exchange, I have two servers. One is in our network and host the Hub/CA/Mailbox roles, and the other host...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
I have some MSS issue with a ASA running 7.2
Here is the scenario
The client is a web browser (IE 6 or 7 )
The server is Appache ( don't know the version)
protocol is HTTPS - 443
When th...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
can I take a configuration file from a pix 6.2 box and load it onto a 7.2 box? Does the config adapt to the newer IOS version?
http://www.experts-exchange.com/Hardware/Networking_Hardware/Firewalls/Q_23696259.html
I added to my existing pix config for a new site-to-site VPN and in the process dropped all cisco vpn client users. Below is what I have added to the pix for the site to site VPN that dropped all V...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Firewalls/Q_23722695.html
I need to be able to access 2 servers within my dmz when I am VPN'd in with my cisco VPN client. Right now I can't. Both servers have external IP addresses pointed to their DMZ ip addresses which w...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
I would like to block a website from a single user using the PIX. If possible how can I achieve this?
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
I had my pix shoot up to 98% memory in use last night which caused some issues. luckily I have a failover cluster and was able to force a failover to get everything back into service. Almost sounds...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
