I got 2 Cisco IP phones 7940. Anybody has a link so I can figure out how to configure them on my 2 cisco 2621 routers and a link how to configure the ip phones themselves?
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21346955.html
Zones:
RoutersDate Answered: 03/30/2005 Grade: A Views: 0
Ok this is driving me nuts. I had previously converted a Cisco 7940 to a SIP by changing the TFTP IP and having it load up newer versions of the firmware 7.4.
I recently had to reset the phone ...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_21795367...
Zones:
VoIPDate Answered: 04/13/2006 Grade: A Views: 5
I have a compaq 7940 pavilion that is equipped with an amd-k7 559mhz processor and an Aspen 2 motherboard. I am trying to hook up a palm IIIxe to it via a USB port and when sync is attempted a mes...
http://www.experts-exchange.com/Hardware/Misc/Q_20590608.html
Zones:
Hardware,
PCsDate Answered: 01/20/2004 Grade: A Views: 0
I have a cisco 7940 ip phone that i would like to use at home with a voip service such as broadvoice. I have worked on this for about 8 hours trying to understand all the lingo with this setup and ...
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/Q_22408235.html
Hi
I have a Zultys MX 250 IP PBX running on software version 2.0.10. And I also have Cisco IP phone 7940 and 7905 that is SIP aware.
I am able to get the phone to point to the MX 250 and g...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_20961594...
Zones:
VoIPDate Answered: 05/26/2004 Grade: A Views: 4
Did any one before was able to setup any Cisco IP phones work with ShoreTel VoIP switch? I am trying to setup Cisco 7960 SIP with ShoreTel 24 (Shoreware 5) in Most cases I getting error on phone "p...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_21357172...
Zones:
VoIPDate Answered: 01/10/2006 Grade: A Views: 107
I just got a Cisco 7940 IP Phone.
2 questions, is it H.323 compatiable?
How do I upgrade it to use H.323 and or SIP?
Links to TFTP software and how to do it will be appreciated.
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_21465499...
Zones:
VoIPDate Answered: 06/21/2005 Grade: A Views: 0
Hi
I have a Cisco 7940 Ip phone running SIP7.5. Ive also aquired a Sipura SPA-3000 Voip Adapter. Is anyone familier with these two devices and able to offer assistance in setting up the Cisco 7940...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_21529898...
Zones:
VoIPDate Answered: 08/23/2005 Grade: A Views: 0
Hello all.
We are moving into a new office soon and we will be getting our own T1 circuit and VoIP provided by the ISP (Speakeasy).
They are providing the T1 router (Netopia) and VoIP Gateway...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_21985670...
Zones:
VoIPDate Answered: 10/30/2006 Grade: A Views: 0
I have just put in some new network drops that I thought were done correctly, however when I plug my Cisco 7940 phones into these network drops they do not receive power. I have verified that data ...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_22087016...
Zones:
VoIPDate Answered: 12/13/2006 Grade: B Views: 0
