How to change the Logo on Cisco 7940G phone with SIP Firmware? The phone's current firmware version is 8.12 SIP.
Thanks in Advance...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/Asterisk_/Q_245...
Hi,
Whats the best firmware for the 7940G when connecting to the 2800 CME? and which is the best version of CME 4.x for the 7940G?
Thanks
Mark
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/Q_23459342.html
I have bought 10 Cisco 7940G revA0 which I have planned to deploy in my office using PoE.
Whenever I start my switch with the phones connected; the phones do not boot.
Both the switch and pho...
http://www.experts-exchange.com/Networking/Misc/Q_22014843.html
I have a Brand new Cisco 7940 IP Phone. I have just signed up for RingCentrals program that gives information on setting this phone up. The information Given to me is as follows:
SIP Domain: sip...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_23391117...
Zones:
Voice Over IPDate Answered: 06/30/2008 Rating: 9.3 Views: 22
Hi,
I am having trouble configuring a 7940G to connect to my 2800 Call Manager Express.
I am getting an error on the phone saying "Protocol Application Invalid". I think this might have someth...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/Q_23452308.html
Zones:
IP TelephonyDate Answered: 08/21/2008 Rating: 8.2 Views: 0
One way audio on Cisco 7940G SIP version running in a remote location
*The phone is out of company's network (it's not local) So I have to forward the port 5060 so that the phone can register wi...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/Asterisk_/Q_245...
do you can show me where i can found for configuration and manual or user guide cisco ip phone 7940G and 7912.
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/Q_23474563.html
Zones:
IP TelephonyDate Answered: 06/12/2008 Rating: 8.3 Views: 0
I've been looking into some IP phones for a client and came across the Cisco 7940G which seems to satisfy our requirement of a device supporting MGCP.
However, I'm slightly confused. Do I just p...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_23245493...
