Dear all,
I have purchased a Cisco VoIP 7961 device, in order to connect on an Asterisk PBX. In addition, Cisco has provided me with the SIP firmware of this device, in order to upgrade it accor...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_22892005...
Zones:
VoIP,
CTIDate Answered: 12/20/2007 Rating: 6.2 Views: 108
I'm running Cisco IOS Version 12.4(15)T1, and CME 4.1.
I have sucessfully setup ad-hoc conferencing and can now have a conference call between 8 partys using the hardware DSP conferencing.
Ho...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/IP_PBX/Q_227869...
Zones:
IP PBX,
VoIPDate Answered: 12/14/2007 Rating: 8.0 Views: 4
I currently have a cisco 2821 running FXO 4 port, which I am routing all calls out over a VoIP provider. I have found out that 7970 or 7961 ip phone is nice but seems to be having a problem when I...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22595843.html
Hi,
How i can assign speed dial to buttons in Cisco IP phone 7961 & 7970 from the Phone itself. I have CCME 3845 and now i i found that i can assign the speed dial only from browser. Thats by lo...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_22787698...
Zones:
VoIPDate Answered: 01/14/2008 Rating: 7.2 Views: 35
we have cisco 7941 and 7961 IP phone. how can I change the background banner or wall paper on the phone? Or changing the logo on the cisco IP phone 7941 and 7961?
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/Q_22837568.html
Daylight savings rolled over and the phones have not changed time yet. How do I fix this in Call Manager 6.0?
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_23235176...
Zones:
VoIPDate Answered: 03/26/2008 Rating: 6.4 Views: 107
I have a Cisco 7961G IP phone that is saying that it has invalid touch tones. Does anyone have an idea of what is causing this problem and if so, how do you fix it?
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_24862681...
I have two Linksys RV042 VPN Routers in place; one at home, one at work. I have them both setup and working great my VPN is connected 24x7 and I can access all network resources both directions.
...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_23485770...
Zones:
VoIP,
Routers,
VPNDate Answered: 06/16/2008 Rating: 6.4 Views: 4
I have a Cisco 7961 phone that was reset back to factory defaults. When the phone boots up it establishes network connectivity and gets an ip address. The screen is basically blank with just the ...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_24807681...
