Hello experts,
I'm hoping someone can shed some lights here to my question.
We have a Cisco 871 router setup for Easy VPN through a wizard to connect to a Cisco UC 520 device.
It worked in...
http://www.experts-exchange.com/Software/System_Utilities/Remote_Access/VPN/Q_23155091.htm...
Is this a possible setup?
Is it less reliable than having both routers from the same manufacturer?
Is it more difficult to get working that both routers from the same manufacturer?
My customer...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21194710.html
Zones:
RoutersDate Answered: 01/05/2005 Grade: A Views: 4
Hi everyone. I want to enable a VTY user for remote access to this router. For some reason, i set the password but i cannot log into the router using hyperterminal. There might be a policy that is ...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21594607.html
Cisco 800 series router - How can I check if it blocking port 25 ?
Our exchange server is connected to a Cisco 800 series router - yesturday we stop receiving emails - can we could no longer tel...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22694495.html
We have a network of 3 sites all running 2 Cisco 877 (12.4(9)T4) routers with a broadband line connected to each.
We are using Splicecom Maximiser phone systems on each site and I would like to ...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_23119036...
Zones:
VoIP,
RoutersDate Answered: 02/20/2008 Grade: A Views: 71
Hi All,
I have CISCO 800 Series Router that connects me to the internet thru a ADSL connection (with Fixed IP address). After that router I have my firewall to filter and monitor all the incomin...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23129286.html
Hi all,
I have a Cisco 800 series router and I have 10.0.26.22 as the lan address and 10.2.1.252 as the Wan address.
I am able to ping 10.0.26.22 but unable to ping 10.2.1.252.
If I trace ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23218777.html
Zones:
RoutersDate Answered: 03/18/2008 Grade: A Views: 29
First time cisco user. I've had some problems setting this 851 up. It did not automatically give me an IP to connect to the router as it says it should, so I had to put static ip to do so.
I had...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23315373.html
I am trying to get my 877w to link up with AT&T Yahoo in austin area
debug shows the ppp handshake going out and then nothing.
Here is the config I am using I have also tried snap
service...
http://www.experts-exchange.com/Networking/Broadband/DSL_Cable/Q_23384825.html
I have been brought in to support a network setup by another person. He refuses to give me the Admin and Enable login and passwords for the Cisco 800 series router? Are there any known ways to cr...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Q_23483080.html
