I just replaced my old linksys WRT54G with a cisco 851W router. Every thing seems to be working fine, except for my PASV MODE in my ftp. On my old linksys, I was able to do a port forward on a rang...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23679462.html
Zones:
RoutersDate Answered: 08/26/2008 Grade: A Views: 0
I know that I have to be missing something simple. I have had all kinds of problems trying ot get the wireless to work on a Cisco 851W router. I am running the most recent version of IOS. 124-15-...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Wireless/Q_22932216.html
I have a pix 501 at my office and at Cisco 851W wireless router at home. I want to setup a VPN from home to office between the two. what commands do i need to perform on the pix and the 851?
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
I want to know 2 things about this.
1- How should we count VPN tunnels?
We want to enable Site to Site VPN among a couple of Cisco 851 and we also want to enable some on the field workers to ...
http://www.experts-exchange.com/Software/System_Utilities/Remote_Access/VPN/Q_23358616.htm...
Zones:
VPN,
RoutersDate Answered: 04/29/2008 Grade: B Views: 0
I have a Cisco 851w setup to allow vpn connections using EASYVPN Server running on the 851w. Is there a method to allow the remote user, once connected to the VPN, access to the internet but not ac...
http://www.experts-exchange.com/Software/System_Utilities/Remote_Access/VPN/Q_23395269.htm...
ISP = Wireless Highspeed Provider
ISP Router = Microtik
My Router = Cisco 851W
WAN = FastEthernet4
LAN = FastEthernet0-3
Server = SBS 2k3 R2 (DHCP Server)
Access Point = Cisco 1121G...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23499756.html
Zones:
Routers,
ISPsDate Answered: 07/18/2008 Grade: A Views: 4
We have a single Cisco 851W router, it was working fine until we needed to make a change and discovered we no longer had the passwords for it -- so we attempted the password recover procedure and l...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Q_23575746.html
I am building a solution that will require wireless access for an area 200 yards in diameter. I want to utilize a high-gain antenna for use with the 851W, but cannot find the connector type to find...
http://www.experts-exchange.com/Networking/Wireless/Q_23616749.html
Hey all,
I am trying to configure a new cisco 851w router for a small business. I am experiencing an issue where the wireless users on the same Vlan, Bridge, and SSID are not able to ping other...
http://www.experts-exchange.com/Networking/Wireless/WLAN/Q_23800775.html
We have a cisco 851W working as the office router.
We have several NATs configured pointing to some internal machines accessed from outside by some users.
Our ISP is going to replace the int...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23879138.html
Zones:
RoutersDate Answered: 11/10/2008 Grade: B Views: 10
