We are hoping to use HSRP on two Cisco 871 firewalls. The issue is that our ISP assigns "static" IPs via DHCP and the devices have to have their MAC addresses registered to pick up an IP to be ass...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Firewalls/Q_23464476.html
Everything else seems to be working except for the internet access when activating the wireless radio-
I'm probably missing a line somewhere, or misconfigured an access-list-
Thanks in advanc...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Wireless/Access_Points/Q_2325...
I have a new Cisco 871 router. I am using a cable ISP with a dynamic IP that never changes. I am able to access the internet thought the router but that is about it. I would like some help setting ...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21562022.html
We got a up an running VPN tunnel beetween 2 sites, tu tunnel remain up but we are experiancing disconnection for some telnet connection after inactivity ( We Though ? ) . The customer says that , ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21983100.html
Zones:
RoutersDate Answered: 10/03/2006 Rating: 8.2 Views: 0
I have to buy a router for an office with 20 workstations and 5 servers. 5 people to use VPN from their homes.
I want to buy a CISCO router. Which is the best choice? 871 or 1811?
What are the di...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22124191.html
Zones:
RoutersDate Answered: 01/16/2007 Rating: 9.2 Views: 0
Hi, we recently got a Cisco 871 Router and I got it all set up. I power-cycled it and all of the sudden it is not handing out IPs and I can't connect to it via SSH, console, http, or directly throu...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22419501.html
Zones:
RoutersDate Answered: 04/11/2008 Rating: 8.2 Views: 0
I've removed a permission to access a remote router and now I'm stuck. I can't access it from the local network or remotely. What are my options. I know that we had it set up for SSH and RCP and po...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23293826.html
Zones:
RoutersDate Answered: 04/18/2008 Rating: 7.6 Views: 0
I want to route my public IP's to my LAN for a few servers. I have a Cisco 871, it works fine with the FE4 WAN port setup with 1 of my public IP's, and NAT enabled. All my LAN computers can share t...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23709486.html
Zones:
RoutersDate Answered: 09/08/2008 Rating: 9.2 Views: 0
I am trying to upgrade my Cisco router but have hit a snag. The image that I am trying to upgrade to is roughly 18.5 mb and the image currently on the router is about 12 mb. The router only has 2...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23868178.html
Zones:
Routers,
...Date Answered: 11/03/2008 Rating: 9.0 Views: 14
We are trying to configure a Cisco 871 to connect to Qwest Home DSL and for some reason I can't figure out what I am missing. We cant get Internet traffic no matter what we try. The attached con...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23963043.html
Zones:
Routers,
...Date Answered: 02/25/2009 Rating: 9.6 Views: 39
