Hello i have a cisco 837 but now the dsl line is upgraded to ADSL2+ and i don't works with the 837 i have a 877 router and paste the config in it i have changed some things as ethernet0 to vlan1 .....
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
How do I enable pinging on a CISCO 877 ADSL router to allow someone to ping the WAN address?
http://www.experts-exchange.com/Networking/Broadband/DSL_Cable/Q_23438112.html
Hi,
I have tried to setup a Cisco 877 to my ISP (BT), but have failed; I have a funny feeling the reason is the Cisco Router 877 I purchased is not UK compatible.
The WAN port is labeled ADSL...
http://www.experts-exchange.com/Networking/Broadband/Q_21620574.html
Zones:
BroadbandDate Answered: 11/15/2005 Grade: A Views: 8
I have a cisco 877 I need to create 2 vlans. I would then like to associate a vlan to 2 of the switch prorts on the router and the other vlan to the other 2 ports. I would also like to have dhcp ac...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22052921.html
Zones:
RoutersDate Answered: 11/08/2006 Grade: A Views: 0
Hi,
I'm trying to configure a Cisco 877, I have the DSL portion complete and working I just cant get access from inside, I think its the access lists but I cant figure it out, please help im dyi...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22851485.html
We have approximately 20 clients on the network. 15 of them being regular users, a few IP based printers and a server or two. The device which we are using is the Cisco 877 ADSL Router for small of...
http://www.experts-exchange.com/Networking/Network_Management/Network_Design_and_Methodolo...
Hi Guys,
I was wondering if you could tell me how I would go out about finding whether or not my Cisco 877 can perform at ADSL2+ levels?
I have attached a "sh dsl int atm0"
Thanks
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23432047.html
i have a cisco 877 as network termination and want to dmz to a netscreen firewall including esp traffic for the netscreen firewall vpn.
i have setup dmz but it only seems to be for tcp/udp need ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23561638.html
Hi guys,
I have minimal knowledge of Cisco but I have just picked up a client running a VPN between two cisco routers,
I used telnet to log in about a week ago and allow https access. I need...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
I am trying to set up a cisco 877 for sweden with vpn, at the moment O cant get the natting working right, the router is online and ok and I can ping IP address and dns from there, however from the...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
