Hi all,
I am setting up a home network consisting of a PC and a Laptop. I am trying to decide which router to buy, and I have a list of features I would like, but have no idea if they actually ...
http://www.experts-exchange.com/Networking/Misc/Q_21252717.html
HI.
I have an ADSL router which has its MTU and MRU set to 1500 (its default setting).
Recently i found out my ISP uses MTU and MRU settings of 1458 - i think that was the number 14xx anyway, i...
http://www.experts-exchange.com/Networking/Misc/Q_20505945.html
Hi all,
Basically wanted to know what the config would be to configure a cisco 837 to be a no nat router. I want to have a similar configuration to :
http://www.experts-exchange.com/Hardware/R...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21836146.html
Zones:
RoutersDate Answered: 06/05/2006 Grade: A Views: 0
Hello EE,
I have a SBS network, with an ADSL router connected for Broadband access.
One morning I notice internet was sluggish, timing out here and there, and generally a pain to navigate. Af...
http://www.experts-exchange.com/Networking/Broadband/DSL_Cable/Q_23423715.html
Hi all
I need advices from you, basically we've got an ADSL2 (24 mbit) connection to the internet, it is shared among 10 PCs.
In terms of network design, I am not really sure whether the prop...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Modems/Q_23553332.html
I have got an alcatel USB modem that I need to connect to my BT 5861 broadband router (but there is a problem.There is only RJ-45 ports on my router and so I cannot connect my modem to it and then ...
http://www.experts-exchange.com/Networking/Misc/Q_20759492.html
HI
We have recently purchased a firebox soho 6 to replace our old firewall
The set up is as below
We have just purchased a block of ip's from our isp these are: 84.aa.bb.40 to 84.aa.bb.4...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21400294.html
i have the following 2 products
http://catalog.belkin.com/IWCatProductPage.process?Merchant_Id=&Section_Id=203283&pcount=&Product_Id=247177
http://www.netgear.com/products/details/WGT624.php
and...
http://www.experts-exchange.com/Networking/Misc/Q_21814604.html
Hi,
I have a Cisco 827 Router. I am using Hyperterminal and a proper consol cable to configure it.
Everything seems to work fine (displays all boot up information in hyperterminal) but when i...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22742535.html
Zones:
RoutersDate Answered: 05/28/2008 Grade: A Views: 0
Hi.
I am trying to get our /32 and /30 IP ranges assigned to our 877 with no luck.
When i enter a /32 in the dialer0 interface i get "bad mask /32 for address ***" I have had a look arround...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23634462.html
Zones:
Routers,
ModemsDate Answered: 08/08/2008 Grade: A Views: 16
