I am looking at buying an ASA5510 with AIP-SSM as a firewall for my company. The only negative I see on it is the lack of monitoring capabilities. I currently use a Linux iptables firewall with n...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21698630.html
Dear Experts,
I have a server outside the network that is used for accounting.
We connect directly to this network via an ISDN line and a simple IBM Router that is pushing all traffic from the...
http://www.experts-exchange.com/Networking/Misc/Q_22035005.html
Zones:
Networking,
...Date Answered: 10/24/2006 Rating: 7.6 Views: 0
Hello everyone,
Long time lurker, first time asking.
I was recently given an asa 5510 to deploy which will replace our citrix server as well as our linux iptables firewall.
I have most things ...
http://www.experts-exchange.com/Hardware/Routers/Q_22106758.html
Zones:
RoutersDate Answered: 12/30/2006 Rating: 9.8 Views: 101
I need some help configuring DMZs on an ASA 5510.
Here is how it is setup physically:
Internet
|
Router
|
ASA 5510
| |
Inside DMZ Switch (Cat 2960G)
In ...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
First one of these I've done so appols for the stupid questions :)
1. Can the management Port be used as the failover port?
2. Ive set up
eth0 outside sec 0
eth1 DMZ1 sec 50
eth2 DMZ2 sec...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
Hi All,
I have a small problem in Static routing of my smtp traffic.I can send mails but i can not receive any mails.
The complete configuration is as follows,
Any clue please....
: Sav...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Firewalls/Q_22821886.html
I will use ASA 5500 series to configure VPN tunnel for my company. I have experience on configuring PIX 500 series model but no idea how to configure the ASA 5000 series. Is it some difference or s...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
I just set up a new ASA5510 for a VPN remote client solution a, VPN tunnels to a partner connection, and GRE tunnels to remote site to site locations. Unfortunately, none of them appear to be worki...
http://www.experts-exchange.com/Software/System_Utilities/Remote_Access/VPN/Q_24034778.htm...
Zones:
VPNDate Answered: 01/08/2009 Rating: 9.1 Views: 0
I have a new ASA 5510 that I would like to configure for only VPN from a dedicated external link coming into our private network. The VPN authentication should be kerbros , LDAP towards windows dom...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Firewalls/Q_24061543.html
Anyone has experience setting up ASA 5510 firewall VPN access base on the end point MAC address? I have a headache with non-company PC spreading viruses after implemented SSL / Anyconnect VPN.
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
