Advertisement

1 - 10 of 31 containing alltags:("Catalyst 3750") (0.001 seconds)
Hello, I've created a VLAN on a L3 switch which I think would make it a connected route. The route is not listed in the table, is there something I am missing?
Zones: Networking Hardware, Routers, Switch...Date Answered: 08/27/2008 Grade: A Views: 9
Hello all, I'm having a hard time grasping a config where I believe HSRP would benefit us.  Here is the scenario and a description of what I would like to do: We have two Internet connections...
Zones: Switches / Hubs, Routers, Cisco...Date Answered: 01/07/2008 Grade: A Views: 4
I am trying to configure a Catalyst 3750 to route to a T-1. I can ping from the router to the T-1 but I cannot ping from anywhere else on the network. Here is what I have done: On the specif...
Zones: Switches / HubsDate Answered: 04/07/2008 Grade: B Views: 9
HI Experts, I started with a new company that has a fully routed network. My prevoius company had layer 2 on the access.  Can someone explain this to me a little better? I saw our network admi...
Zones: Switches / HubsDate Answered: 02/21/2008 Grade: A Views: 0
Hi I have two 3750s. On one when I issue the show logging command it gives me the time and date each message was recevied however on the other one each message is preceeded with 6w2d. I tried en...
Zones: Switches / Hubs, Network OperationsDate Answered: 03/11/2008 Grade: A Views: 17
Hi all, I have a catalyst 3750 switch and just trying to setup span on one of the ports just having a few issues. I have 4 stacked swtiches together. Once in telnet I am presented with STK-1#...
Zones: Switches / HubsDate Answered: 05/02/2008 Grade: A Views: 40
Hi, I am seeing the following error on a Catalyst 3750: 291579: May 19 11:30:56.303 BST: %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on GigabitEthernet1/0/12 (85), with ldn-t...
Zones: Switches / Hubs, Routers, NetworkingDate Answered: 05/22/2008 Grade: B Views: 66
Hi, Pretty new to Cisco switch configuration, so hopefully the below makes sense! I need to configure a couple of VLANs (one for workstations, one for servers) on a single Cisco 3750 switch a...
Zones: Switches / Hubs, Routers, Network Design ...Date Answered: 09/11/2008 Grade: A Views: 158
Hey all. ok.. 3750 - 100mb ethernet interconnect layer2 dot1q trunk to ISP assigned vlan955 to end site (the ONLY connection using this link), with appropriate IPs etc.. working perfectly, s...
Zones: Switches / HubsDate Answered: 09/28/2008 Grade: A Views: 109
OK guys, I need some direction.  I have a back up Fiber connection connecting my remote site data closets.  The Verizon guy handed off the 10 MEG line to me in ethernet form on both ends.  I need t...
Zones: Networking Hardware, Routers, Switch...Date Answered: 10/14/2008 Grade: A Views: 0