In my company I've got Cisco 1841 (192.168.2.10) configured as VPN Server connected to Linksys RV082 (192.168.2.0) on which I have my whole LAN I want to be able to access through Cisco VPN Client....
http://www.experts-exchange.com/Software/System_Utilities/Remote_Access/VPN/Q_23419237.htm...
Zones:
VPN,
RoutersDate Answered: 05/26/2008 Rating: 8.0 Views: 9
I am attempting to create/configure an Async interface using the Aux port on a Cisco 1841. I have input the command in config mode INTERFACE ASYNC1 among others ASYNC0, ASYNC0/1, etc. All result ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21485334.html
Zones:
RoutersDate Answered: 07/18/2005 Rating: 9.4 Views: 4
Cisco 1841 configuration.
I would like to add another subnet to my existing LAN to free up some addresses. I have a 192.168.0.x subnet and am trying to add a 192.168.2.x subnet. MY issue is that I...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21579017.html
Zones:
RoutersDate Answered: 10/24/2005 Rating: 5.8 Views: 0
I have a small business that is using a Cisco 1841 router and a Cisco PIX 506E firewall that only has one T-1 associated with it right now. I didn't program either of them and the company used to ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21585271.html
Zones:
RoutersDate Answered: 10/11/2005 Rating: 8.4 Views: 0
I have tried to get it connected to a second switch/ a vlaned switch/ and a server box, but I just can't seem to get the protocol on the port to read as up. What is the correct configuration to hav...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21696389.html
Zones:
RoutersDate Answered: 01/14/2006 Rating: 8.4 Views: 0
We just had a Point-To-Point T1 line installed between our LA and SF offices.
Each office has a Cisco 1841 Router configured on each end and the 2 see each other and can ping devices inside th...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21719296.html
Zones:
RoutersDate Answered: 02/05/2006 Rating: 5.0 Views: 0
Dear All,
I've got some weird problem with my 1841. The first problem is I'm able to ping the ISPs IP on my WAN interface (220.220.220.4) but not my own (220.220.220.5).
Same problem on the oth...
http://www.experts-exchange.com/Networking/Misc/Q_21744721.html
HI
I had a network like this
----ethernet inside--pix 506--ethernet outside----------ethernet--cisco 2600--serial--------internet
192.168.1.1-----------------xxx.xxx.211.116-------xxx.x...
http://www.experts-exchange.com/Networking/Misc/Q_21862464.html
I need to have a DMZ setup on Ethernet port 0/0 to 63...226 address so that all the 63 server can talk to the 10 traffic and vice versa. I also need to have the 63...225 address open to out side ...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21871220.html
Currently have a network structured like this:
Site A -------- Internet
|
Site B
Site A is using 192.168.53.0/24 internal network. Domain controller, DHCP server, DNS server, router to...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21890207.html
Zones:
RoutersDate Answered: 06/21/2006 Rating: 9.2 Views: 10
