Anyone have a sample router 2821 script and/or suggestions to help in this configuration so I don't start from scratch? We already have the hardware and I will be setting this up for the first tim...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21497402.html
Zones:
RoutersDate Answered: 07/28/2005 Grade: A Views: 8
Hi,
Im having real problems with setting my new Network Module (NME-16ES-1G) After my router loads and boots successfully the EN (enabled light) is not lit on the card. I have read on Cisco docu...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21993091.html
Zones:
RoutersDate Answered: 09/29/2006 Grade: A Views: 18
Hi There,
is it possible to connect a VWIC-2MFT-G703 interface to another router with the same interface(Directly Connected)
and ping each other ?
Do i have to Use RJ48 ? or RJ45 will fit !
...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22127226.html
Zones:
RoutersDate Answered: 01/31/2007 Grade: A Views: 11
I have three Cisco 2821s acting as peers. They are IPs 10.1.1.1, 10.1.1.2, and 10.1.1.3.
The router at 10.1.1.3 is sporadically dropping the connection to 10.1.1.1 or 10.1.1.2. This only happens...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22631096.html
Zones:
RoutersDate Answered: 06/19/2007 Grade: A Views: 13
My network is using OSPF for distributing routes. This includes to my firewall devices.
I built a transparent squid proxy to handle our user's web requests.
Internally, my firewall uses the I...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22792309.html
Zones:
RoutersDate Answered: 08/31/2007 Grade: A Views: 0
I would like to know if there's a way to monitor the bandwidth used per IP on our Cisco router. We consistently have problems with someone downloading something and it chews up all of our bandwidth...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
Hi All,
I am getting constant input and CRC errors on one of my router serial interfaces. My telco says they have tested to the CSU and have found nothing, and want me to turn on some sort of p...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23548057.html
Zones:
RoutersDate Answered: 07/08/2008 Grade: B Views: 0
Howdy, I have two sites connected together over a WAN link @ 512Kbps. On both edges of WAN I have Cisco 2821 with Enterprise IOS. The VOIP solution is Ericsson. I have QoS working well so far, but...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/IP_PBX/Q_236391...
Zones:
IP PBX,
VoIPDate Answered: 09/09/2008 Grade: A Views: 0
I need to remove remarks from multiple access lists
access-list 100 remark auto generated by SDM firewall configuration
access-list 100 remark SDM_ACL Category=1
access-list 100 remark Test
a...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
Was a bit difficult to explain myself in part one but here goes; We are currently utilizing a NEC Neax 2000 pbx based system with analog phones (approximately 150phone/fax lines served via the PBX)...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_23144892...
