I have a Cisco 3825 router and I need to have auditing enabled. I have logging turned on and i can see failed log ins and successful log ins how ever I need to see more activity. I need to know i...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23842158.html
Zones:
Routers,
...Date Answered: 10/28/2008 Rating: 8.0 Views: 0
We have just deployed a 3825 as an endpoint router in our hosted environment. It was a long hard fight, but we're almost done....Now we have users who are connecting to a FTP server and are getting...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23246457.html
How can I load balance LAN traffic between both built-in Gigabit Ethernet ports?
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23197455.html
Zones:
RoutersDate Answered: 02/27/2008 Rating: 9.4 Views: 4
I can't ping from 2811 router through 3825 router on my LAN to secondary ip address on a third router. I can ping from the 3825 router to the third router just fine. Below is the scenario:
281...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23583096.html
Zones:
RoutersDate Answered: 08/20/2008 Rating: 8.8 Views: 0
I have been using a Cisco 3640 router with 6 serial interfaces connected to external CSU/DSU from Adtran. I have a Cisco 3825 that I have configured to replace the 3640 and everything wen well exce...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22999999.html
Zones:
RoutersDate Answered: 01/17/2008 Rating: 8.8 Views: 0
Greetings. We have a 3825 Series Cisco router. This router is nekid - no config at all. We've done the Intitial config, however, the HWIC's are not showing up in SDM or in the show INTERFACES. SDM ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23245272.html
Zones:
RoutersDate Answered: 08/04/2008 Rating: 9.3 Views: 0
I need help getting routing set up on a 3825. The router is currently running Call Manager Express and I need to add 20 more phones to the router. The 3825 is directly connected to a 3750 through t...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23294744.html
We are changing our T1 service provider and I need to change the IPs that we reference in our Running Config. I want to make sure I do this correctly and wanted to ask for verification.
As fa...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23369552.html
Zones:
RoutersDate Answered: 05/13/2008 Rating: 7.6 Views: 4
Recently we had a 2M Ethernet Link for a Internet Connection to the Telco. We have actually had a IPSEC VPN Connection over the Internet Link. Once we start moving the traffic on the IPSEC link we ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23790351.html
Hi All,
I'm trying to configure vlans in Cisco 3825 using HWIC-4ESW module. The router shows the module is installed properly and I configured the VLAN too. but the line protocol of the FE and V...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_24294772.html
Zones:
Routers,
...Date Answered: 04/09/2009 Rating: 8.7 Views: 123
