HI All,
Can we use a LAN interface of cisco 877 router as WAN interface?
reson behind is we are replacing 871 router (with 877) whose WAN port is connected to adsl modem and configured.
problem...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23295239.html
Zones:
RoutersDate Answered: 01/21/2009 Rating: 7.7 Views: 0
Hi,
I have tried to setup a Cisco 877 to my ISP (BT), but have failed; I have a funny feeling the reason is the Cisco Router 877 I purchased is not UK compatible.
The WAN port is labeled ADSL...
http://www.experts-exchange.com/Networking/Broadband/Q_21620574.html
Zones:
BroadbandDate Answered: 11/15/2005 Rating: 7.8 Views: 16
Hi,
I'm trying to configure a Cisco 877, I have the DSL portion complete and working I just cant get access from inside, I think its the access lists but I cant figure it out, please help im dyi...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22851485.html
Zones:
Routers,
...Date Answered: 09/25/2007 Rating: 9.2 Views: 4
We have approximately 20 clients on the network. 15 of them being regular users, a few IP based printers and a server or two. The device which we are using is the Cisco 877 ADSL Router for small of...
http://www.experts-exchange.com/Networking/Network_Management/Network_Design_and_Methodolo...
Zones:
Net...Date Answered: 01/25/2008 Rating: 6.2 Views: 4
Hi Guys,
I was wondering if you could tell me how I would go out about finding whether or not my Cisco 877 can perform at ADSL2+ levels?
I have attached a "sh dsl int atm0"
Thanks
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23432047.html
Zones:
Routers,
...Date Answered: 05/26/2008 Rating: 8.7 Views: 86
i have a cisco 877 as network termination and want to dmz to a netscreen firewall including esp traffic for the netscreen firewall vpn.
i have setup dmz but it only seems to be for tcp/udp need ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23561638.html
Zones:
Routers,
...Date Answered: 07/22/2008 Rating: 8.4 Views: 9
Hi guys,
I have minimal knowledge of Cisco but I have just picked up a client running a VPN between two cisco routers,
I used telnet to log in about a week ago and allow https access. I need...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
Hi guys,
I am having an issue where I have users at a remote office working through a VPN connected to the main office that cannot connect to the terminal using its local IP address or FQDN.
...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
I am trying to set up a cisco 877 for sweden with vpn, at the moment O cant get the natting working right, the router is online and ok and I can ping IP address and dns from there, however from the...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
Hi All,
Am configuring a new 877 but am having difficulties. As far as I know I have configured correctly but get the following error when testing the ATM interface connection:
Have posted St...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23965559.html
Zones:
Routers,
ModemsDate Answered: 12/15/2008 Rating: 4.6 Views: 30
