Enter Keywords:
1 - 10 of 12(0.001 seconds)
Sort By:
 
I am in the process of setting up a new facility.  I have a vendor who is going to be onsite and will have his own network.  I have a cisco 2811and I am in the initial configuration stage, so nothi...
Zones: IPSec, Data Encryption, Ro...Date Answered: 11/21/2008 Rating: 9.2 Views: 0
I have an internal network, with an internal mail server. When I do an DNS lookup for my mail server, it goes to 203.xxx.xxx.xx which is a public address. The router is set up to do a port...
Zones: Routers, NetworkingDate Answered: 09/24/2009 Rating: 9.3 Views: 0
Hi all, I am just about done migrating my pix to the ASA but i noticed something different in how the ASA manages static NAT as compared to PIX. In the PIX i was able to configure 2 static NA...
Zones: Hardware FirewallsDate Answered: 08/28/2009 Rating: 9.0 Views: 0
    RemoteSite   (172.16.1.*)         |        Internet --- InternetUsers         |        ASA --- LocalUsers (192.168.1.*)         |      InsideNet     (10.1.1.*)         |       Route...
Zones: Cisco PIX Firewall, Net...Date Answered: 09/20/2009 Rating: 7.0 Views: 0
Hello, I have a network that is secure but we have a user from one of our client sites that needs to use Cisco VPN to access his network from ours... I don't know to much about Cisco VPN having on...
Zones: Routers, VPNDate Answered: 05/05/2008 Rating: 8.2 Views: 0
Ok, So i have been working on configuring one of our 1841's for a new T1 connection. Mind you this is my first time so I have been learning as we go. The issue I am having is I cannot get the l...
Zones: Routers, ...Date Answered: 06/26/2009 Rating: 6.8 Views: 0
Hello All, I have a Polycom VSX5000 unit that I would like to enable streaming on. The problem is that the VSX5000 and the PC's I want to stream to are not on the same subnet. The PolyCom V...
Zones: Networking, ...Date Answered: 08/13/2009 Rating: 8.1 Views: 0
Hi all, I'm in a bit of a conundrum; I've been working on a Cisco 2801 with a 12.4(23a) IOS and I'm having some problems trying to get static NAT working (at least I think this is my problem). A...
Zones: Routers, Network De...Date Asked: 11/20/2008 Points: 125 Comments: 8
Hey Everyone, I have a ASA 5510 which I am setting up at the moment. It has two internal networks (data, and voice) connected directly to the ASA. At the moment both networks can go out to the...
Zones: Hardware Firewalls, Cisco PIX F...Date Answered: 08/27/2009 Rating: 9.1 Views: 26
I am trying to get PAT working on a cisco pix with some luck. We are trying to translate internal hosts for http and smtp to a single external IP. So far, the http is working and I can accept in...
Zones: Hardware Firewalls, Cisco PIX F...Date Answered: 03/10/2009 Rating: 8.0 Views: 11