ISP informed that they need to allocate a new IP range for us due to some spam issues(dont ask) at one of the branch office
I need to change PIX configuration remotely
What is the best way to do ...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
Hi Experts :)
I am not a PIX Guru so here goes. Due to our current RAS (remote access)[ip:193.10.60.108] server causing issues with DNS and browsing i have setup another RAS [ip:193.10.60.110]on...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
Hi, Can anybody explain if Cisco PIX treats outbound traffic to be safe? And If yes, in the scenario where if a company has a CIsco PIX as the firewall and if an employess by mistake open a email m...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
I have a 5mb internet connection that is shared across my WAN to about 150 users at any given time . Users are complaing that the connection keeps timing out. I suspect that the Pix configurations ...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
Hi, first of all I have limited experience configuring Cisco firewalls. We are testing a spam blocking device and I need to forward smtp (port 25) traffic to the new device for testing with the pos...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
I have just setup a Cisco Secure PIX 506 Firewall and have a problem with it. I have installed the 515 version with no problem but this one doesn't work - maybe because of the ip setup.
DESCRIP...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20113798.html
Zones:
RoutersDate Answered: 08/20/2001 Rating: 7.4 Views: 0
Hi everyone
I'd like to know if someone could point me to a document which describes how to connect a cisco pix 515 firewall to an external vpn.
Thanks in advance.
Lior.
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20454402.html
Zones:
RoutersDate Answered: 04/16/2003 Rating: 7.2 Views: 0
I have a Cisco PIX 506E hooked up to DSL modem. The PIX connects using pppoe and receives an ip from the telco. I can ping public ip addresses from the outside interface. I have enabled client a...
http://www.experts-exchange.com/Networking/Misc/Q_20489343.html
I am using a Cisco PIX 501 at home as my firewall. The outside interface is attached to my cable modem.
The outside interface uses DHCP and has no problem getting the IP from Adelphia. The interna...
http://www.experts-exchange.com/Software/System_Utilities/Remote_Access/VPN/Q_20546343.htm...
Zones:
VPNDate Answered: 03/23/2003 Rating: 6.6 Views: 0
We have Win2k sp2 with Exchange 2K sp3 and some users are defined as pop3 users. The pop3 users are on slower (56K Frame Circuits) so we use pop3 on the exchange server to minimize bandwidth issue...
http://www.experts-exchange.com/Software/Server_Software/Email_Servers/Exchange/Q_20553735...
Zones:
ExchangeDate Answered: 10/20/2003 Rating: 9.6 Views: 0
