I have a NEC 2000 phone pbx that has 2 network cables that connects into a Cisco 2924xl (IOS 12.0(5.2)XU ). From here, it hops across 3 more Cisco 2924XL switches, until it eventually hits the swti...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21336895.html
Zones:
RoutersDate Answered: 05/25/2005 Rating: 8.8 Views: 0
I have a 3560-8 that we are using to divide our internet traffic between two companies.
I need to be able to limit the traffic for one of them interface fastether0/1 to 3 Mbps.
http://www.experts-exchange.com/Hardware/Networking_Hardware/Q_24010180.html
I need to configure QoS for VoIP on my LAN switches (Cisco Catalyst 2950, 2960, and 3560). How do I make that happen?
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_22901792...
A vendor installed a new voip system at a school I support. They used HP Procurve switches for the offices and configured them as follows:
hostname "ProCurve Switch 2510-24"
snmp-server community...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_24035206.html
I'm looking for good examples of QoS configuration for my switch :
I have VoIP communications going through a Cisco 3500 series XL switch, however the sound quality of my phone calls are very bad.
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_22603093.html
We are looking at purchasing a Cisco Phone System. So we would be running Cisco call manager with Cisco phones, unity for voicemail, so all Cisco. We also need to forklift our whole network in or...
http://www.experts-exchange.com/Networking/Network_Management/Network_Operations/Q_2263705...
I was wondering if anyone has a guide on how to setup the cisco router and switch for QOS such that priority is given to voice packets over data packets. The phones would be connected to the switch...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22415940.html
Say i have a voip phone connected to a swich and i use auto qos on the switch for all teh FA and trunk port to the router. On the router do i need auto qos trust on both the ehternet connection to...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23896589.html
I have setup 4 Cisco 2960 with Two VLANs. VLAN 10 for Voice, VLAN 20 for data.
The VOIP providers have told us there requirements are to have QoS seutp on the switches with a CoS of 7 for voice...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_24675481.html
I need to setup QOS for Avaya 9600 series phones. I have all the phones separated from the data network using 802.1q on the router. I now need a good example of how to setup QOS.
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/Q_23051162.html
