Is there any way to use a Cisco router to throttle bandwidth to 384/128 on a per user level? So far, I have only been able to impose throttling at the interface level and the entire pipe becomes re...
http://www.experts-exchange.com/Networking/Misc/Q_22098326.html
Zones:
NetworkingDate Answered: 01/02/2007 Rating: 7.2 Views: 0
I was wondering if anyone knew if the Cisco 1721 supported CBTS. I cant find anything on the web to confirm this. I can comnfirm that it does support FRTS, but not CBTS. Any help is appreciated.
...
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/2003_Server/Q_243109...
The ISP thatwe are using is offering a trial "speed upgrade" for 6 months from 10mb to 20mb. From what I can gather, they need us to make sure that we configure our router to accomodate the speed, ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_24628525.html
Zones:
RoutersDate Answered: 08/21/2009 Rating: 7.1 Views: 0
Hello Experts!
I have a cisco 2600 router in my offce. I need to limit the inbound and outbound traffic of a public ip address i have configured. Is there a way to do this from the router or do...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21282077.html
Zones:
RoutersDate Answered: 01/20/2005 Rating: 8.4 Views: 164
How do I shape traffic on a single port on a Cisco 6509 with CatOS? I need to limit traffic in and out of the port to 5Mbs without dropping any packets over the 5Mbs limit.
http://www.experts-exchange.com/Networking/Network_Management/Network_Design_and_Methodolo...
Zones:
Net...Date Answered: 09/25/2007 Rating: 7.6 Views: 6
Hello Experts,
I operate a home-grown WISP in my rural neighborhood. All of a sudden, I'm the big fish in this teeny puddle. I've run into trouble and I hope you can spare some time to help....
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22526065.html
Greetings,
I have a Cisco 2821 connected to a stack of switches(non cisco) with about 200 devices connected to the ethernet LAN. I would like to traffic shape individual LAN source IPs on the C...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23407113.html
Zones:
RoutersDate Answered: 02/13/2009 Rating: 7.6 Views: 14
Hi,
I am looking for some help in how to configure Packet/Traffic shaping on a Cisco 2960 Catalyst switch. I have had a look about and found some docs but these mostly relate to routers. My ai...
http://www.experts-exchange.com/Networking/Misc/Q_22520979.html
Hi there,
I have configured a QOS policy and would like to configure traffic shaping for my class web. Policy is given below. As can be seen I'm allocating 30% of the bandwidth to web class...
...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23990188.html
We have two sites that connect via MPLS. The CIR of the circuits is 3Mbps.
We already have QoS configured for Voice/Video traffic which works fine. We want to restrict traffic coming from a partic...
http://www.experts-exchange.com/Networking/Telecommunications/Q_24661743.html
