Advertisement

1 - 10 of 35 containing alltags:("DFI") (0 seconds)
I'll give specs first: DFI LanParty nForce II Ultra Rev. B AthlonXP 3200+ (stock clock) 768 MB RAM ATI Radeon X800 Pro Windows XP Pro SP2 Okay, I have a problem with a complete freeze witho...
Zones: Hardware, Fans / Cooling, Video CardsDate Answered: 07/10/2004 Grade: A Views: 0
Greetings, I have computer with a DFI Motherboard (CA64-TC/TN) and would like to upgrade the Graphic/Video Card to one that is compatible with the board but will support video editing and also h...
Zones: General SystemsDate Answered: 06/04/2006 Grade: A Views: 8
I recently purchased a DFI 5BV3+ rev CEO motherboard with 64MB PC100 SDRAM, and an AMD K6-2/450MHz CPU - after assembling the items, on initializing the sytems with windows 95 - I get a 'windows pr...
Zones: Windows 95Date Answered: 06/25/1999 Grade: C Views: 0
MY RAM ARE BOTH MARKED PC-100.  MY MB CAN BE RUN 66MHZ OR 100MHZ, BOOK SAYS BOTH RAM WILL WORK ( 66 OR 100).  IF I INSTALL FASTER RAM WILL IT RUN SLOW ACCORDING TO FSB OF THE MB?? CAN I INSTALL 66 ...
Zones: Hardware, RAMDate Answered: 11/05/2000 Grade: B Views: 0
Hi Everyone:       I am needing a BIOS Flash for a motherboard.  The motherboard id# is 05-03-1999-(K6BV3+)-CD-2A5LED4KC-00.  The motherboard name is DFI K6BV3+/XV3+ .  In addition to direct d...
Zones: Hardware, RAM, ComponentsDate Answered: 07/09/2003 Grade: A Views: 0
Hi Everyone:           Since a previous post will be going in other related, but, yet independent directions, I decided to create a new post as opposed to creating a thread of questions in a sin...
Zones: HardwareDate Answered: 08/14/2004 Grade: A Views: 0
The divide statement below gives an entirely wrong answer:      Result = dfi->Free / dfi->Allocated;     // Result <- 178956470 = 0x0AAAA8B6 where dfi->Free is -12000 and dfi->Allocated is 24...
Zones: ProgrammingDate Answered: 12/30/2005 Grade: A Views: 0
Using a DFI motherboard w/450 processor and 64meg of RAM, also 13g harddrive. Since I have put the hard drive in I have been experiencing a series of lockups, ranging from POST to actually going...
Zones: Hardware, ComponentsDate Answered: 04/23/2000 Grade: A Views: 0
I have a Compaq 56K DFi Modem (hopefully not a winmodem) that works fine under W95. However, when I try to address it with a networking program in linux (e.g. minicom, kppp, etc.) I get a message t...
Zones: Linux, Linux DistributionsDate Answered: 06/28/2000 Grade: A Views: 0
My computer is: Athlon XP 1600+, 1.4GHz DFI AZ30-EL ProView 17' ??? OS: Windows 98 (is it worth to use WinXP Pro ?) and I have two problems: (1) There are prety large group of programs wh...
Zones: Hardware, Video CardsDate Answered: 11/05/2003 Grade: A Views: 0