Hi,
Our company's new T3/DS3 line between NYC and LONDON is installed and running. However, the throughput that we got is very low.
The line is supposed to be 45mbps but I am getting 671KB/s...
http://www.experts-exchange.com/Networking/Misc/Q_21952320.html
Zones:
Networking,
...Date Answered: 10/27/2006 Grade: A Views: 0
hey all
thanks in advance
so here is the issue, and i am embarased to ask this question.
I just had 2 rg59 cables delivered from main office with a message to hook them up for the new ds3 that...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Cables/Q_23236377.html
Hello,
I have a 7500 series router with a ds3 card and the fastethernet, the ds3 is unchannelized t3 of bandwidth and has no IP address so only the ethernet has the IP. I am using Solarwinds...
http://www.experts-exchange.com/Networking/Misc/Q_21092734.html
I am currently looking at getting a DS3 but my question is, first what routers are capable of supporting such a connection and second What would be your suggestion?
http://www.experts-exchange.com/Networking/Misc/Q_21216314.html
Zones:
Networking,
FTPDate Answered: 12/01/2004 Grade: A Views: 0
We are currently using an Imagestream DS3 router. I'd like to get recommendations on other vendors of DS-3 routers for a (potentially) more reliable solution. My question is two part: What is the...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21763681.html
Zones:
RoutersDate Answered: 05/02/2006 Grade: A Views: 26
I have one router at SiteA and another at SiteB. They will be connected via a DS3 point to point line.
Is there a sample configuration ?
The HSSI card is :
one port T3/E3 Network module
GDC ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22671579.html
Zones:
Routers,
WLANDate Answered: 07/04/2007 Grade: A Views: 0
can anyone help me with configuration example of hssi interface for cisco 3640 router. here is the information i got from our isp ( i have changed ip's)
wan interface 68.1.2.3 255.255.255.252
...
http://www.experts-exchange.com/Networking/Broadband/Frame_Relay/Q_20639646.html
Zones:
Frame-RelayDate Answered: 06/13/2003 Grade: C Views: 43
What would be a good and cost-effective solution for this situation.
Situation 1:
-------------
I need to get a T3 line coming to a central location and from there I need to provide certain b...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21393497.html
Zones:
RoutersDate Answered: 03/16/2006 Grade: A Views: 0
I have a cisco 7206 with M2t-t3 interface card and I have purchased a ds3 circuit with the following:
this first circuit is 3mpbs
VPI/VCI: 0 / 56
Terminate-from hostname: Hidden for security
...
http://www.experts-exchange.com/Networking/Broadband/ATM/Q_21472398.html
Hello we have a DS3 patch panel and am having a problem with the 64 pin connection on the back side of it. Its very sensitive if it gets bumped or barely touched it causes a few T1s to go down. T...
http://www.experts-exchange.com/Networking/Misc/Q_21511536.html
