There seems to be a problem for NT 3.51 with the printer driver that follows NT 3.51 for the HP Deskjet 1200C/PS.
We cannot get more than one copy at the time, but have to reprint the documetnts, ...
http://www.experts-exchange.com/Networking/Windows_Networking/NT/Q_10001683.html
Im getting hardware overruns and crc errors everytime i use RAS with NT 4.0. I have a PPRO200 (micronics m6pi motherboard), 32 megs, diamond stealth 2001, USR courier v.everything internal. Im us...
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/NT/Q_10003594.html
Zones:
Windows NTDate Answered: 02/27/1997 Rating: 5.4 Views: 0
I need NT 4.0 Workstation,
drivers for my new network card,
3Com EtherLink XL PCI (3c900-TPO).
They were not available at Microsoft's site,
& I couldn't find them at 3Com's.
I need them very fast...
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/NT/WinNT_Setup/Q_10...
Zones:
Win NT SetupDate Answered: 04/12/1997 Rating: 6.6 Views: 28
I have a laptop from Wedge Technologies (Pentium 133 MHz, PCI bus) with a VADEM VG 469 PCMCIA Controller Card. I have tried to install two different PC Cards without success. These cards are:
Me...
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/NT/WinNT_Setup/Q_10...
Zones:
Win NT SetupDate Answered: 05/26/1997 Rating: 6.0 Views: 23
I just installed WIN95 on my system over an existing version of DOS 6.2. Windows recognized my external CD-rom at the parallel port properly (it's a RAP//CD from Noveca with a TEAC 6X drive in it),...
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/Win95_3x/95/Q_10010...
Zones:
Windows 95Date Answered: 05/08/1997 Rating: 6.2 Views: 0
I have a video card with a western digital wd90c11-lr chipset.
I am currently running at 640x480x256 and would like to increase it to 800x600x256. I have searched for all the drivers i could find, ...
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/Win95_3x/95/Win95_S...
Zones:
Win95 SetupDate Answered: 05/14/1997 Rating: 5.0 Views: 0
I can't install the drivers for my Awe64 Gold under NT 4.0 Workstation. I've been on Microsofts and Creatives sites but there are no answers there. Can somebody please help me out. Thanks in advanc...
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/NT/WinNT_Setup/Q_10...
Zones:
Win NT SetupDate Answered: 06/15/1997 Rating: 6.2 Views: 0
I have Turbo PCI Ethernet card of unknown vendor.
It works fine with Windows 95, but drivers for NT-4.0 were
actualy copied from NT-3.51 and crash system after loading.
Card is NE2000 compatible,...
http://www.experts-exchange.com/Hardware/Misc/Q_10015466.html
Can't run 640x480x256 graphics under windows 3.1. Don't have
correct driver. What is the correct driver (I don't know)? Microsoft is no help, LSI is no help (on-board video chip). Packard Bell is ...
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/Win95_3x/3.x/Win3x_...
Zones:
Win3x SetupDate Answered: 07/02/1997 Rating: 6.2 Views: 62
ok, here's the scoop...
got a 25 user Novell 3.12 network divided up into 2
segments. nothing wrong there. clients are happy and
connecting to the server. autoexec.ncf as follows:
load 3...
http://www.experts-exchange.com/Networking/Novell_Netware/Q_10019031.html
Zones:
NetwareDate Answered: 08/05/1997 Rating: 7.6 Views: 6
