Advertisement

Check out our new and improved Advanced Search! We have added additional search options and the ability to save your searches.
 
Enter Keywords:
 
1 - 10 of 99(0.001 seconds)
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!

8.0
Someone in my company installed this Pix a long time ago and now I need to access the configuration utility. Where to start?
Zones: Networking, Hardware Firewalls, Consumer Fi...Date Answered: 05/19/2005 Views: 0
I have a broadband connection in my office. I want to install ind integrete checkpoint firewall with it. Please let me know the steps to do the same.
Zones: Checkpoint Firewall, Networking, Bro...Date Answered: 06/27/2008 Views: 0
Ive just purchased a firewall, Im installing a firewall between my routers(D-Gateway) internal interface and a HUB, since my firewall is physically internal, do I assign it a Public or Private Ip?
Zones: Networking Hardware, Ha...Date Answered: 07/13/2008 Views: 0
How do I configure the cisco 506e firewall On a new server?
Zones: Software Firewalls, C...Date Answered: 11/08/2004 Views: 0
Dear Friends, i need a exact code for this problem i am using iptables firewall i want to restrict all my client machines internet access exept one site linux server my internal ip eth0 -...
Zones: LinuxDate Answered: 01/04/2005 Views: 0
Hi, I'm new, hope someone can help me... I have configured PIX firewall with 3 interfaces: inside, outside and DMZ. My configuration is like these: INSIDE -------- clients IP:             ...
Zones: Networking, Hardware Firewalls, DHCPDate Answered: 06/30/2005 Views: 0
We have a client running Windows 2003 Small Business Server SP1. We have recently switched their Internet service provider which required some minor reconfiguration of the server. I have had no pro...
Zones: SBS Small Business ServerDate Answered: 10/19/2006 Views: 0
I would like to use the SBS2003 domain controller to configure all the Windows Firewalls on the Windows XP Pro workstations in our domain.  Can some type of policy be setup on the DC that will conf...
Zones: Windows 2003 Server, Windows XP, SBS Small Business ...Date Answered: 03/06/2007 Views: 0
I am trying to configure OWA and on our firewall i entered the following commands: access-list incoming 100 permit tcp pulic ip address eq https - To allow OWA access static (inside, outside)...
Zones: Cisco PIX Firewall, Exchange, Emai...Date Answered: 07/03/2007 Views: 0
I have a Pix 515e ver. 7.2 that I'm currently using for network security, VPN Access and I just added a Site-to-Site vpn.  My internal network is 10.100.0.0/16 (long story on why we're using a clas...
Zones: Cisco PIX FirewallDate Answered: 12/19/2007 Views: 0