Advertisement

Check out our new and improved Advanced Search! We have added additional search options and the ability to save your searches.
 
Enter Keywords:
 
1 - 10 of 216(0 seconds)
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!

2.6
I installed new fujitsu 3.5gb HD in my computer. So now I have one old 1gb hd and 3.5gb new hd. I partitioned 3.5 to 1.5bg and 2gb and my system looks like this c:\ 1.5gb new hd d:\ 1gb old hd e:\ ...
Zones: Windows 95Date Answered: 10/24/1997 Views: 0
if i do a clean installation on a new computer (600 celeron - 128 mb ram 20.4 gb fujitsu hdd- gigabyte ga6va7+ mainboard) - NT works fine untill i install any of the service packs - either 4 or 6 ,...
Zones: Windows NTDate Answered: 08/29/2001 Views: 0
I clean installed Windows XP Pro with SP1 on a friend’s Duron 800 systems with 386MB of RAM.  Everything is running great except for a problem when playing CDs. He has a Fujitsu 40x CD-ROM and a...
Zones: HardwareDate Answered: 06/06/2003 Views: 0
I put this new hard drive in. its not the main one. i have another one which has the OS on it. so anyways i put this new one in. and when i load up the computer, it shows up fine on the startup bla...
Zones: HardwareDate Answered: 12/05/2003 Views: 0
I have a Siems Fujitsu Scaleo running ME. The problem is that it will not boot up from time to time. I have to switch it on and leave it for about 10 minutes, then all of a sudden it starts up. I h...
Zones: Hardware, ComponentsDate Answered: 03/29/2005 Views: 0
We have a client using Paperport.  They have been using the Fujitsu FI4120 scanner for Paperport, but Fujitsu now has a non-twain scanner for several hundred dollars less than the 4120.  Does Paper...
Zones: SoftwareDate Answered: 10/21/2005 Views: 0
I have a fujitsu fi-4860c Scanner attached to a XP Pro PC with 1 gig mem and a 2.8 gig processor Via Scsi Cable\Card. I am having a heck of a time getting the scanning to work at all. It ju...
Zones: ScannersDate Answered: 04/07/2007 Views: 0
So a Fujitisu drive failes... When slaved via USB drive - everything is visible except the user profile where all the data is stored! When you click on user "John" it just comes up as blank....
Zones: Hard DrivesDate Answered: 08/18/2008 Views: 0
Hi i have an error message " F5BA2019 The error is found in the procedure " anytime i tried to compile my cobol program. Below is the diagnostic message. ** DIAGNOSTIC MESSAGE ** (SHEET1) C:\US...
Zones: Cobol, Editors IDEsDate Answered: 12/07/2007 Views: 0
Could anyone please tell how to setup communication parameters at a Fujitsu DX2400 matrix printer? TIA, F.H.Eschbach
Zones: PrintersDate Answered: 12/20/1998 Views: 0