Advertisement

1 - 10 of 166 containing alltags:("G3") (0.001 seconds)
Ok.  I have a client, whose drive failed twice in a week.  I would run norton disk doctor, which would find major errors, but could not completely fix them.  So, i would have to zero out the drive....
Zones: Apple OS, AppleDate Answered: 01/29/2005 Grade: A Views: 0
Can someone help me determine which powerbook model I have? I think it's a PowerBook G3 400MHz (Firewire/Pismo) but I need a sure fire confirmation before I place an order for a memory upgrade.
Zones: General, Apple LaptopDate Answered: 07/15/2005 Grade: A Views: 0
What is wrong with this RAID Controller? I mean seriously am I doing something wrong or is it really that bad.  If you count the factor that is installed on an HP server is even worse. First ...
Zones: Hardware, ServersDate Answered: 06/14/2008 Grade: A Views: 13
is there any online documentation .. ie a mainboard manual that would give me suffcient information on overclocking my CPU and also best software for partioning .. ie is there anything like partit...
Zones: Apple OS, Apple, AppletalkDate Answered: 03/17/1999 Grade: A Views: 0
I have a variety of modems accessing our network via RAS and a DIGI RAS8 modem board through a Lucent Definity G3 ECS phone switch.  Users are intermittently disconnected (whether idle or not) at a...
Zones: Windows NT NetworkDate Answered: 12/02/1999 Grade: B Views: 0
I have a Blue G3 running OS9.2.2. Usually, the first attempt to startup is unsuccessful, the monitor remains blank. If I then restart all is OK. I've zapped the PRAM and run Norton Disk Doctor, but...
Zones: Apple OS, Apple, AppletalkDate Answered: 09/12/2004 Grade: A Views: 0
I've got a Laserwriter Select 360 hooked up to a beige G3 through a serial cable.  The G3 and the eMac are connected to the campus LAN through an ethernet splitter.  Is there any way I can get my e...
Zones: Drives / StorageDate Answered: 04/23/2004 Grade: A Views: 0
Hello,    I have a 450 mhz processor from a G3 Blue and White and I have a 450 processor pulled from a G4 AGP model.  I believe both processors were meant to run at a bus speed of 100 Mhz.  I want...
Zones: Apple OS, Apple Desktop, AppletalkDate Answered: 10/18/2004 Grade: A Views: 0
First of all: is this the appropriate Area?? I don't find another area where I can put this... Hello,   I have an iAudio G3 mp3 player with firmware version 1.2 and 1GB memory. Normally it ...
Zones: HandheldsDate Answered: 08/17/2005 Grade: B Views: 0
I have to network an iMac g3 (2000) to broadband ethernet it was previously setup to dial-up through AOL. Now the person i'm doing this favor for wouldn't mind pulling ethernet cable but, wants to...
Zones: Apple OS, Apple, AppletalkDate Answered: 01/28/2006 Grade: B Views: 0