Enter Keywords:
1 - 8 of 8(0 seconds)
Sort By:
 
Hi, I'm using GPS receiver to get current velocity and position of my car. My question is how to calculate distance covered so far from the starting point using the GPS receiver inputs. NMEA mess...
Zones: MS Visual Basic, GIS/GPS P...Date Answered: 03/29/2009 Rating: 7.2 Views: 29
On a new Dell Latitude E6400, XP, the GPS is on the 5530 cellular card. It appears to be working fine, NMEA strings appear in Telnet and shown on GPSDIAG program, including fix. However 2 dif...
Zones: GIS/GPS Programming, Wind...Date Answered: 04/24/2009 Rating: 7.0 Views: 13
If I enter NMEA lat. lon. data from my GPS reciever the position is about 10 miles off. What is the trick to entering into MapPoint using the NMEA string $GPGGA as a data source ? Example: 3...
Zones: GIS/GPS ProgrammingDate Answered: 09/03/2005 Rating: 8.8 Views: 0
For my application, I use the Ashtech - BR2G G12 GPS unit to measure my coordinates (moving operation). That particular unit will generate differentially corrected coordinate information using eith...
Zones: GIS/GPS ProgrammingDate Answered: 08/17/2004 Rating: 7.2 Views: 53
I am putting together my hobby project where I am planing to install in car GPS Tracking devices which can record all GPS data ,in some source of flash memory card, while I am driving around.  My o...
Zones: GIS/GPS ProgrammingDate Answered: 05/14/2005 Rating: 8.0 Views: 6
Hi All, I am hoping a math wizard can help with this question, i am trying to work the estimated accuracy of position using the $PTNL_GGK NMEA string, there is DOP collumn which is dilution of p...
Zones: Math & ScienceDate Answered: 10/11/2009 Rating: 2.6 Views: 0
I'm looking high and low for a GPS (ideally bluetooth, but serial is fine) with a built-in digital compass that actually exports the digital compass reading in the NMEA Stream. I'm finding ...
Zones: GIS/GPS Programming, Digital Living Ha...Date Answered: 09/07/2008 Rating: 7.0 Views: 4
If multiple GPS receivers are simultaneously transmitting data to the same base server, how do we identify the individual GPS receivers ? In other words, which field in NMEA corresponds to the uniq...
Zones: GIS/GPS Programming, Progr...Date Asked: 03/11/2009 Points: 500 Comments: 3
 
  • 1