We are currently researching an upgrade to our network. We have around 35 stations and we want to upgrade to Gigabit Cards and Switches. Can any recommend a good gigabit switch and cards?
Than...
http://www.experts-exchange.com/Hardware/Misc/Q_23099819.html
if i have one switch chained to another switch, is that bad?
if not, what is the max number of chains before it starts causing issues?
i am asking because i am looking at buying a switch. ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21852996.html
Zones:
RoutersDate Answered: 05/18/2006 Grade: A Views: 0
I have a Ciscto Catalyst 4006 switch Supervisor Engine II (purchased around 2001). I would like to add a gigabit ethernet blade (Cisco part WS-X4424-GB-RJ45). I have not been able to verify that...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_22461078.html
i would like to know what is the best Gigabit switch in the market, there is plenty Brands but i want to know the stable and strong one the go for high speed. i have several Gigabit devices that i ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23353300.html
I am trying to speed up links to our remote offices without having to bump up the bandwidth through our T1 and was wondering if installing a Gigabit switch at the data center and connect all the se...
http://www.experts-exchange.com/Networking/Misc/Q_21669783.html
I have two Linksys SRW2048 switches, currently connected too each other with 1 of the miniGBIC ports. I would like to maximize the throughput between the two switches, and would like to use all 4 m...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23089139.html
Hi,
I'm trying to configure a simple office network using VLANs on my Netgear smart switch and I'm a little stuck.
I'm going down the port-based VLAN route although my switch does support 802...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23301564.html
Background:
I have a network in the office that comes in to a modem set up in bridge mode, then goes to a firebox, then to a switch that all the computers are on. We have the firebox primarily for...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Q_23386697.html
Hi,
I have bought a refurbished Cisco Switch and noticed it has some VTP configuration set however i cannot remove it. I do have enable password and can configure the switch but how does one rem...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23710896.html
Hi Experts,
My company is moving to a new building and I'm looking at upgrading our switches at the same time. Right now we have 2 48 port 3COM Superstack3 4500 10/100 switches connecting 25 pcs...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23797404.html
