What is the procedure for to replace the HBA in a Compaq server?
Currently, the ProLiant DL580 conatins a FCA 23552GB FC HBA Dual Port Card, connected to MSA1000 storage. This card needs to be ...
http://www.experts-exchange.com/Storage/Misc/Q_20693159.html
How do I install, configure and setup host bus adapter on HP MSL5000 tape library?
http://www.experts-exchange.com/Storage/Misc/Q_22520595.html
What are the command lines that can show me the following data of HBAs?
Switch Name
Port
Speed
Mode
thx much
http://www.experts-exchange.com/OS/Unix/AIX/Q_22677324.html
Zones:
AIX UnixDate Answered: 09/07/2007 Grade: C Views: 0
I'm connecting a Solaris host to external storage via a switch (host is using Emulex LP8000 HBA) when editing lpfc.conf, should I use world wide port name or world wide node name for the persistant...
http://www.experts-exchange.com/OS/Unix/Solaris/Q_20293034.html
Hi, I'm fairly new to SANs and have questions regarding failover with HBA's.
We have a small (but growing) SAN using Brocade switches, an EVA disk array and Emulex HBA's in Windows 2003 servers...
http://www.experts-exchange.com/Storage/Misc/Q_21548894.html
hi..
i have formatted a server and load it with win2000 advance server.
i need to install , configure fibre channel card and then install
navisphere manager to monitor status of my Clariion FC...
http://www.experts-exchange.com/Storage/Misc/Q_21681814.html
is it possible to have a virtual HBA like you can do with the network adapters and bind it through it? i'm not seeing anything where that is possible to directly map a lun.
http://www.experts-exchange.com/Storage/Misc/Q_21855951.html
HI,
I have win2k3 server that has a emulex and a Qlogic HBA installed going to different raids. What are the steps I should take to reinstall the OS? Will the hba's "remember" their confgrtn's...
http://www.experts-exchange.com/Storage/Misc/Q_21888784.html
After about a month of working my hd stop working
on the scsi setup menu i can see it but on boot i get the following message:
Symbios Inc. SDMS(TM) V4.0 PCI SCSI Bios, PCI Rev. 2.0, 2.1
Copyrig...
http://www.experts-exchange.com/Hardware/Misc/Q_20076186.html
Zones:
HardwareDate Answered: 05/15/2001 Grade: B Views: 17
Hello,
I have P3 667, Assus motherboard P3X4 agp
bios version 1005
Win Me.
I am tryin to connect my IBM ultra2wide Harddisk. Type DMVS, Scsi LVD.
I have terminated my scsi kabel. placed ju...
http://www.experts-exchange.com/Hardware/Misc/Q_20111101.html
