Advertisement

Check out our new and improved Advanced Search! We have added additional search options and the ability to save your searches.
 
Enter Keywords:
 
1 - 10 of 1564(0.046 seconds)
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!

8.4
Hi,   I have two unix servers and two NT DELL servers at Exodus.  I want to know whether I have enough amp/vol from the outlet, whether or not I share the circuit with other people.   Stuffs ...
Zones: Hardware, ComponentsDate Answered: 08/14/2000 Views: 0
My Sony CPD-G520 will not power down with the video card tells it to - it's a VisionTek GeForce 3 using the latest detonator drivers. The monitor says "MONITOR IS WORKING - Signal Out Of Range", an...
Zones: Hardware, Video Cards, Mon...Date Answered: 07/14/2001 Views: 0
My configuration: abit kt7a-raid amd t-bird 1,33GHz (266MHz FSB) 384 mb PC133 RAM 3d Prophet 4500 64mb Tv-out (driver 7.114) SB Live! Value Studio PCTV Tv-tuner Realtek 10mbit networkcard (d...
Zones: Hardware, ComponentsDate Answered: 07/30/2001 Views: 0
i recently bought an AMD XP 1800+ and a Gigabyte GA7DXR+ motherboard. i installed everything up to par and when i turned it on i did not get a screen, the monitor didnt even turn on... i recieve po...
Zones: Hardware, ComponentsDate Answered: 05/13/2002 Views: 0
Hi, My monitor, which is Gateway Diamondtron 17", will not turn off. The power button in the front does not work. I keep pressing it but no luck. Does anyone out there have a clue as to how to ...
Zones: Hardware, Monitors / DisplaysDate Answered: 12/19/2003 Views: 0
My computer has two cd drives, both are burners with one being dvd-rom also. my question is that, what or why is there no power going the cd drive? the power connections are connected but no power.
Zones: Hardware, ComponentsDate Answered: 02/25/2003 Views: 0
Sometimes my computer does not power up at all: no LED light, no sound, nothing upon pressing the power button on the machine. At other times, the power LED on the button flashes once and then ever...
Zones: General SystemsDate Answered: 05/15/2003 Views: 10
Hi, strangely enough i didn't find a topic on servers, so i hope this is the right place to ask my question. My problem is the following: after rebuilding the system and expansion boards of my pro...
Zones: General SystemsDate Answered: 10/10/2004 Views: 0
I just added a new hard drive to my system. To add the hard drive i had to use a Y power cable because i ran out of power cables.system is now as follows: P III 866MHz 384 MB SDRAM 133 MHz int...
Zones: Hardware, ComponentsDate Answered: 08/24/2003 Views: 0
http://forums.overclockersclub.com/index.php?showtopic=11420&st=0 This topic displays most of my woes, please help...
Zones: General SystemsDate Answered: 10/10/2004 Views: 4