Who call ISR? The OS, scheduler, hardware or ...? I am confused by my professor.
http://www.experts-exchange.com/OS/Miscellaneous/Q_20726181.html
I'm having problems getting my interrupt service routines to work properly. I use the good old Borland TC and follow the examples when setting up my ISR and when saving old vectors and plugging new...
http://www.experts-exchange.com/Programming/Languages/C/Q_10019434.html
Zones:
CDate Answered: 08/07/1997 Grade: C Views: 4
Hello, All,
I would like to write an assembly code in MASM32 for Win2000 platform to handle the IRQ7 from parallel port. The ISR will read the 8-bit data appears on the parallel port data line ...
http://www.experts-exchange.com/Programming/Languages/Assembly/Q_20549625.html
Zones:
AssemblyDate Answered: 02/09/2004 Grade: A Views: 0
Hi, I'm an absolute newbie and need some opinion on Cisco products.
My setup is as below
lease line --- Cisco 1700 series router --- Symantec Firewall/VPN---workstations+servers
Am thinking ...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21496334.html
Is there any reason why I should not use a Cisco 2851 ISR with a WIC-1T card connected to a 2M leased-circuit (for Internet access), and BRI card for ISDN-2 backup (backup access) and also run Cisc...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22600536.html
Its been years since I sat my CCNA and I re-accredit it every three years by sitting my PIX ans ASA exams so I'm more than a little rusty.
I have a client that has one site already, They have a ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_22692061.html
Zones:
RoutersDate Answered: 07/24/2007 Grade: A Views: 8
I am installing a new Cisco 1841 ISR on an Ethernet connected T1 from XO Communications. There was a previous (inherited) Linksys router that was configured with a static IP address and all outbou...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23123534.html
Zones:
RoutersDate Answered: 02/06/2008 Grade: A Views: 8
I have a new Cisco 1841 ISR with a CSU/DSU T1 HWIC in Slot0/0/0 and the LAN connection is running off of interface FastEthernet0/0.
Everything is working perfectly but we want to use the second ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23148305.html
I currently have a 2851 ISR and I have 4 T1's bonded together. I was wondering if I should have fast switching or IP CEF switching enabled right now if I run the command "sh ip interface" it looks ...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23181703.html
Zones:
RoutersDate Answered: 02/21/2008 Grade: A Views: 4
I have a client with 2 cisco 1811's at two different sites. Currently we have two internet connections at our main site and a single internet connection at our remote site. Also going in to our mai...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23312192.html
