Advertisement

Check out our new and improved Advanced Search! We have added additional search options and the ability to save your searches.
 
Enter Keywords:
 
1 - 10 of 2205(0.001 seconds)
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!

5.8
I need to know about a 486 motherboard, 30 pin memory slots, 6 old style expansion slots, about a million jumpers. No manufacturer name, but a part number (FX-3000D). I need to know either the manu...
Zones: Hardware, ComponentsDate Answered: 06/16/1997 Views: 158
Hi, I've tried to install Win NT server version. This is the setup : My system : 8500TVX pentium motherboard           : Cyrix P-166+ processor           : 2.5 Gbit HD (quantum bigfoot)           :...
Zones: Win NT SetupDate Answered: 07/18/1997 Views: 43
I have a system with a Maxtor drive on which I've just received a Primary Hard Disk Failure message on boot.  Can't boot to a floppy, either.  System ran fine before I installed the Maxtor, which I...
Zones: HardwareDate Answered: 01/02/1998 Views: 0
Hi!    Got gipped when computer for my charity clinic & vendor put in parts other than requested & promised,he will be dealt with. In the meantime I've got to buy (elsewhere of course) a new intel ...
Zones: Hardware, ComponentsDate Answered: 03/04/1998 Views: 0
I recently purchased 2 32M SDRAM Dimms and my CPU freaks out when they are installed. My motherboard is supposed to support SDRAM. Anyway, I uninstalled my EDO ram and put the SDRAM in and, when tu...
Zones: Hardware, RAMDate Answered: 05/06/1998 Views: 0
this is my motherboard http://www.pcchips.com/m525.html i have award bios 09/16/1997 S. I want to know if i can use a 200mmx (or higher) in my computer wihtout any problems, also if someone knows w...
Zones: Hardware, ComponentsDate Answered: 07/21/1998 Views: 0
I just recieved a SpeedEasy motherboard P61440LX/ATX legend 1 from a friend which was working satisfactory when a Pentium II 300MHz processor was installed. But after installing a Celeron 300MHZ pr...
Zones: Hardware, ComponentsDate Answered: 12/19/1998 Views: 0
I am trying to get the com port on a motherboard to work.  Everything else on the MB seems to work OK (got it used), and it is set up correctly in CMOS. I am currently using one of those motherboa...
Zones: HardwareDate Answered: 12/13/1998 Views: 13
I recently purchased a J-TX98B motherboard. Put in the following items: CPU - Cyrix 6x86 P166+ Quantum Maverick 500 Mb HDD Western Digital Caviar 850 Mb HDD BTC 36X CD-ROM 32 Mb SDRAM Problem: Th...
Zones: Hardware, RAMDate Answered: 12/09/1998 Views: 0
Can I tell from the PC what motherboard & bios I have?  It is an old board (95) and I know the bios hasn't been upgraded.  I would like to do this, but don't know where to look for the name etc. T...
Zones: Hardware, ComponentsDate Answered: 02/07/1999 Views: 8