I have a TZ-150 with a dynamic address trying to initiate an IPSEC tunnel with a SonicWall Pro 100 with a static IP. I'm connecting with a Pre-Shared key, and all settings appear to match. But on...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_21615719.html
Zones:
RoutersDate Answered: 11/14/2005 Grade: A Views: 9
Creating a VPN from Cisco PIX 501 6.3 to SonicWall Pro2040 3.1
Attempt to communicate, Phase 1 completes and the SonicWall gives the following notification on Phase 2:
IKE Initiator: Received...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX...
I currently have an IPSEC tunnel that was working but after making some changes to the BGP configuration on the router broke due to a routing issue. We have that problem fixed, however the IPSEC tu...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_20360381.html
Zones:
RoutersDate Answered: 12/09/2002 Grade: B Views: 68
I'm having a problem creating a site-to-site VPN connection between a SonicWall Tele3 and Cisco PIX 515e. The tunnel fails on Phase 2 negotiation - the SonicWall logs show "IKE Initiator Received n...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21140724.html
Hi,
I've purchased a Netgear FVG318 Wireless VPN Firewall Router so I can connect to the office network from home. I've followed the documentation and configured both Client and Router but can...
http://www.experts-exchange.com/Software/System_Utilities/Remote_Access/VPN/Q_21808746.htm...
Zones:
VPNDate Answered: 05/04/2006 Grade: B Views: 15
Setting up ProSafe VPN client to go to a FVS318 on a static IP network. Have been thru various documentation, checked and re-checked but still getting log message:
11-15: 13:48:03.706 My Connect...
http://www.experts-exchange.com/Networking/Misc/Q_21631886.html
Good Day,
I'm trying to establish VPN connection between the Sonicwal 2040 at work and Linksys WRG54G at home. I have matched all the require proposal and IP address. But I can't see the conn...
http://www.experts-exchange.com/Networking/Misc/Q_21887929.html
I'm unable to talk to the folks on the other so figured I'd see if I could get some help here. As we all know that Cisco's website is bizarre and horrid to navigate to try and find problems.
I'...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_22011158.html
Trying to get vpn up between CISCO PIX 6.3 and Linksys RV082... Haven't played too much, but have made a few (unsuccessful attempts).
I fill in the info, and hit connect... the status remains at...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Firewalls/Q_22722028.html
Hi,
i try to Subsitute the Cisco VPN Client connecting to a PIX 515E with an LANCOM / NCP VPN Client. This is because i am using a new Vista Business 64-bit Machine.
The PIX Side may not be cha...
http://www.experts-exchange.com/Networking/Security/IPSec/Q_22772093.html
