I have the fallowing setup
Cisco 2601 Routeri with 2 T1 Cards
1 T1 Card goes to Qwest
1 T1 Card goes to CIT
Single eithernet interface
Currently have a primary and secondary IP on this int...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21755457.html
Hi there,
Is it possbile to create a user on the firewall who can access and reconfigure everything within the firewall except remove the logs? We want to give another party the rights to mainta...
http://www.experts-exchange.com/Security/Misc/Q_21759322.html
Hi I'm running a NetScreen 25 w/ 5.3r2 software.
I have an existing subnet from my ISP that we outgrew. The ISP assigned us an additional subnet because no adjacent subnets are available. We ha...
http://www.experts-exchange.com/Security/Software_Firewalls/Q_21870316.html
I have about 120 PCs in the domain and several of them have been powering up in the middle of the night. The rooms that hold these computers are typically secure (HR and the server room, for examp...
http://www.experts-exchange.com/Programming/Languages/.NET/Visual_Basic.NET/Q_23373435.htm...
We had 1 /29 ip pack installed on our netscreen 25
When we grow, we used all available ip's from the pack. So we ordered a new /29
range for more public ip's So now we have 2 differtent /29 ip pa...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Firewalls/Q_22809004.html
I want to set-up a nat translation.
Eth 1 (trust) ip 10.116.85.x
eth 3 (untrust) ip 192.168.108.x
For example I want to translate 192.168.108.239 to 10.116.85.239.
Can someone help my wi...
http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Q_2340772...
Hi Experts
I have Netscreen 25. we purchased it last year.One of the guy was configuring it.He colud not configure it and left the company.Now i am going to configure it.But when i start the fir...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Firewalls/Q_23673866.html
HOW reset juniper password netscreen 25
I hv backup conf file
http://www.experts-exchange.com/Hardware/Networking_Hardware/Firewalls/Q_23513745.html
I have Netscreen Remote VPN client installed. I am able to establish a VPN connection. However, I am not able to resolve the hostname or hostname.company.com. I am able to ping the internal IP a...
http://www.experts-exchange.com/Software/System_Utilities/Remote_Access/VPN/Q_23095119.htm...
Zones:
VPNDate Answered: 06/25/2008 Grade: A Views: 144
I read this Question but i cnot undersand the sol.
http://www.experts-exchange.com/Networking/Security/Q_23248982.html
smae form me
here is the policy list:
Total regular policies 16, D...
http://www.experts-exchange.com/Hardware/Networking_Hardware/Firewalls/Q_23383734.html
