Advertisement

Check out our new and improved Advanced Search! We have added additional search options and the ability to save your searches.
 
Enter Keywords:
 
1 - 10 of 4657(0.146 seconds)
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!

6.2
I installed NT4.O on a Toshiba notebook and it didn't recognize my COM1 port during install.  The PCMCIA setup is fine and my modem is COM2.  I want to use an external mouse on COM1 as opposed to t...
Zones: Win NT SetupDate Answered: 04/28/1997 Views: 0
Hello, I'm using a DOS program for programming EPROM's and I can't run it under NT because the operating system preempts the process while it is burning the EPROM over the serial port.  The only w...
Zones: Windows NT NetworkDate Answered: 11/14/1997 Views: 0
Is there a smart way to use Managewise to remotely control, inventory and virus protect  machines without utilizing all the bandwidth.  Can it be done via IP and not require a login to the Novell s...
Zones: NetwareDate Answered: 02/27/1998 Views: 0
We are trying to hook up a printer on a local hook up not a network.  We are running a Sun with CDE (ver 2.6 I think).  We have an owners manual for Sun ver2.5 and it tells us to:   1) Connect to t...
Zones: SolarisDate Answered: 08/20/1998 Views: 0
I want to set up Remote support on my network. The network consists of several Novell Netware 4.11 servers. (Compaq Proliant & Prosignia). There are also some Unix-machines (HP) and in the future t...
Zones: NetwareDate Answered: 10/26/1998 Views: 0
I have a PII 233 with a modem on com2. Im using win95 osr2 and i have a Award bios. I have a Logitech Wingman warrior joystick that plugs in a COM Port. And i have a Null modem cable on the remaini...
Zones: Windows 95, MeasurementDate Answered: 09/01/1999 Views: 0
My brother has upgraded his machine processor, disk memory , mb, etc. He also has a new motorla 56 k modem, but the computer has assigned com 5 as the com port, It is not working.+ how do you ass...
Zones: ModemsDate Answered: 03/16/2002 Views: 0
Does anyone know the best way to find a free port for listening on? At present I just start at a base port number and attempt bind() until it succeeds, incrementing the port number on each attem...
Zones: Linux DevDate Answered: 01/12/2000 Views: 0
When browsers connect to a web server they commonly use port 80.  Add an address to this and we have a socket.  However, does everyone use the same port concurrently, or is a different socket trans...
Zones: Windows NT NetworkDate Answered: 02/20/2000 Views: 0
I just tried installing a new Zoltrix modem on my pc, and for whatever reason it can't seem to open the comm port. I've tried installing it on all of them and it can't open any of them. I've never ...
Zones: Windows 98Date Answered: 04/05/2000 Views: 0