Advertisement

Check out our new and improved Advanced Search! We have added additional search options and the ability to save your searches.
 
Enter Keywords:
 
1 - 10 of 4280(0.102 seconds)
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!

6.2
I'm trying to boot a PC board w/ a 1MB solid state floppy (Flash Eprom). The boards is said to emulate a Floppy Drive (A:/B:), and in fact everything is OK with Ms-DOS: I can load a MS-DOS boot fl...
Zones: Linux SetupDate Answered: 03/24/1997 Views: 0
I have 20 Systems that were created off of one master Drive. The systems run fine unless you create a boot disk on the Dos 622 side and try to boot to thta floppy. The computers read their hardware...
Zones: Win95 SetupDate Answered: 04/22/1998 Views: 0
I currently use NT 4.0 boot manager to access Win95 or NT 4.0 with the Win95 system being the primary boot drive. How do I move the boot partition from the Win95 drive to the NT 4.0 drive so that t...
Zones: Windows NTDate Answered: 07/25/1998 Views: 0
OK gang, I only have 23 point left but my friend needs help. He lost his config.sys file and cannot get into windows. he can get an A prompt and a C prompt.  when in C he types config.sys and get o...
Zones: Win95 SetupDate Answered: 02/09/1999 Views: 0
How to boot NT 4 without a harddrive ? We have a Novell Netware 4.11 network and the computers all have Boot-PROMS. So they are able to simulate a inserted 1.44 Disk in the drive at boot time. Up t...
Zones: Win NT SetupDate Answered: 05/04/1999 Views: 0
Who can give me a rock-solid reason for why we should be going with a small-ish (1GB) system boot partition using FAT16 VERSUS going with a similar sized partition but using NTFS. My vote is for N...
Zones: Win NT SetupDate Answered: 03/02/1999 Views: 0
I have a PC with Unixware7 OS, and 2 IDE-harddisks; OS in installed on disk 1 (/dev/rdsk/c0b0t0d0s0) in several slices (0= starting sector / 1=root / 2=swap / 7  =boot / 8=alt/trk / 10=stand / 12 +...
Zones: Unix SetupDate Answered: 09/01/1999 Views: 0
why is it that even when I have a bootable cd (checked on other pcs) it will not boot in MY pc.Even when I choose to "boot from cdrom" in my bios.NO cds are able to be booted in this pc.
Zones: Win NT SetupDate Answered: 03/16/2002 Views: 0
I formatted my hard drive on a NEC READY, and didn't do the /s format. It is 6gb and the only way I can boot to C: is with my daughters emachine CD. It boots into A: and the A: drive is named b:. I...
Zones: Windows 95Date Answered: 08/18/1999 Views: 0