Hello to you all... I am posting this question here because EE does not have a dedicated section for telephony questions. My question is in regard to the function of standard PBX systems. I have ...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_21217616...
Zones:
VoIPDate Answered: 11/28/2004 Grade: A Views: 0
I saw this: http://www.asterisk.org/ and now I want to turn a pc or server into a PBX for my small business. We currently only need 2 lines, but may need four in the future. I am not in the mood to...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_21905770...
Zones:
VoIPDate Answered: 07/05/2006 Grade: A Views: 0
Hello all.
We currently have a hosted VoIP system using Cisco phones that are SIP enabled.
We want to go back to PBX systems so I was wondering do you know of any PBX systems that will suppo...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_22039358...
Zones:
VoIPDate Answered: 12/01/2006 Grade: A Views: 8
I've been using MSCOMM for our Call Accounting Project in our Company. I'm trying to create an Mscomm1.Output that will send a command to the PBX and input the results of that command. Can you give...
http://www.experts-exchange.com/Programming/Misc/Q_20459385.html
Zones:
ProgrammingDate Answered: 08/31/2003 Grade: A Views: 0
Do you know the best PBX System?
Panasonic, Nortel Norstar, NEC, etc?
15 extensions and 4 co lines required.
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_21399195...
Zones:
VoIPDate Answered: 06/02/2005 Grade: A Views: 44
I'm a beginner to asterisk and i don't know what knowledge do i need to start working with asterisk.could anyone guide me what to learn to start working with asterisk?????????
thanks
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/VoIP/Q_21671753...
Zones:
VoIPDate Answered: 12/23/2005 Grade: A Views: 0
I have a customer that has a proprietory PBX and he wants to change it to Asterisk PBX. Now this customer has 4 analogue lines. Let's say that he has 5 IP phones that he is going to distribute one ...
http://www.experts-exchange.com/Networking/Telecommunications/Q_22804964.html
Hello all:
I have an Inter-Tel phone system and I (actually my vendor) set up a new set of DIDs on the call routing table. I'm am trying to assign the new DID to extensions, but whenever I Call...
http://www.experts-exchange.com/Networking/Telecommunications/Legacy_PBX/Q_23082065.html
Zones:
Legacy PBXDate Answered: 01/21/2008 Grade: B Views: 0
I am using Asterisk and FreePBX on Centos 5.1
I just finished my install and I have these two errors, I am new to VOIP but not linux
Failed to connect to the Asterisk manager through port: 50...
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/Asterisk_/Q_233...
We have an old Picazo PBX system. Until 2 years ago, we had several incoming 800 numbers. After the company was purchased by new management, they discontinued all but one of our 800 numbers. I r...
http://www.experts-exchange.com/Networking/Telecommunications/Legacy_PBX/Q_23564386.html
